Berger 140gr Elite Hunter

Well, I changed my reloading steps, removed the FL sizer die decapper, started using my Mandrel set, set the neck tension, removed majority of my runout, and started seeing improvements. Looks like a node on 57.5gr area, need to run it again and go below and above a little to see if it improves and run another one at 59.0, I had two nearly in one hole, then a darn flyer. IMG_20241024_174046892.jpg No pressure signs at 59.0, not sure when others start seeing pressure with H1000.
 
Anyone have problems with Berger 140gr Elite Hunter bullets? This is the second rifle I have had hell getting them to group consistently or group worth a flip. They were so so in my 6.5 Creed with H4350, RL-16, RL26 and Staball. Now, having issues with 6.5 PRC with H1000, sporadic on group's, was thinking of trying H4831SC to see if any better, but past experiences tell me I will not have any better results. Just curious if I have drawn the bad luck with these or if others have problems as well. I am thinking of switching to 147 ELD-M for the PRC and see if I have better results.
Try n565.. 1 hole
 

Recent Posts

Top