Kmccord
Well-Known Member
Well, I changed my reloading steps, removed the FL sizer die decapper, started using my Mandrel set, set the neck tension, removed majority of my runout, and started seeing improvements. Looks like a node on 57.5gr area, need to run it again and go below and above a little to see if it improves and run another one at 59.0, I had two nearly in one hole, then a darn flyer.
No pressure signs at 59.0, not sure when others start seeing pressure with H1000.
No pressure signs at 59.0, not sure when others start seeing pressure with H1000.
