SF_52
Member
Anyone still trying these? Just started playing with them in a 300 NMI. Shooting extremely well while fire forming
-
If you are being asked to change your password, and unsure how to do it, follow these instructions. Click here
Barnes 30 cal 212 LRX
- Thread starter tr175
- Start date
-
- Tags
- barnes longrangeshooting
Help Support Long Range Hunting Forum
jja600
Well-Known Member
I was thinking of building a 30 nosler to push these but it may be too long for the magazine.
SF_52
Member
It is too long to fit in a magazine with the Nosler case. The Norma is a great fit
jja600
Well-Known Member
Darn!!! Looks like I may need to go 300 wsm. I don't have a Lapua action. Any other ideas?
SF_52
Member
If you're using a magnum bolt 300 wsm would be the ticket. Still getting ok velocities.
SF_52
Member
I'm sure they will shoot. Just will be a single shot application
260shooter
Well-Known Member
I loaded a few (3) for testing. I shot some 1" mild steel at 100 yards. Shot a 1" group and had the same POI as the 208 Berger HT's in my 26" 300PRC. I made up 20 rounds for special occasions and have yet to shoot any more. OAL is 3.94 so single load, I'll have to dissemble one to get charge weight. Retumbo powder. It made really cool looking craters in the steel. Dished out craters the size of dimes about 3/8" deep and copper colored. I'll chrono some in warmer weather.
Last edited:
260shooter
Well-Known Member
With the top of the bearing surface even with the top of the case neck it measures 3.851ish. Could go a little deeper and fit in a cip mag.
