-
If you are being asked to change your password, and unsure how to do it, follow these instructions. Click here
Any input on the “best” 1/2x28 to 5/8x24 adapter ?
- Thread starter Buckfever34
- Start date
Help Support Long Range Hunting Forum
I've run adapters since I got my first suppressor a decade ago, never had any issues with the 1/2 dozen or so I've purchased over the years from various vendors. If the barrel is too small in diameter to thread 5/8x24, then I just have it threaded 1/2x28 and use an adapter. I've not seen the need to add a bulbous head to the end of a rifle barrel for suppressor use.
QuietTexan
Well-Known Member
I have a Weatherby Mark V Backcountry with a #1 barrel on it. Barely any shoulder even with 1/2-28x threads that came from the factory. I'm going to try to put a Rugged Alaskan 360 Ti on it using an SS adaptor.
I don't have high hopes because the barrel is so stupidly thin, so my concession was trying a 358 cal can instead of a 30 cal can for more clearance. If it doesn't work, it doesn't work. Rifle weighs around 6.5lbs scoped, even a brake would look like a huge bulbous wart on the end of the pencil tube.
I don't have high hopes because the barrel is so stupidly thin, so my concession was trying a 358 cal can instead of a 30 cal can for more clearance. If it doesn't work, it doesn't work. Rifle weighs around 6.5lbs scoped, even a brake would look like a huge bulbous wart on the end of the pencil tube.
I just chopped a Kimber Montana 7 WSM to 19", and threaded it 1/2x28. There's plenty of shoulder for the adapter + can.
QuietTexan
Well-Known Member
The suppressor appears to align, now it's time to shoot it.
Backed off to show the (lack of) shoulder.
Backed off to show the (lack of) shoulder.
Last edited:
