I just built a 300 wsm with a anti x action with a 3-18-50 vx6 hd scope. I ran out of down adjustment. I removed cap and it wont turn down even with cap off. Has anybody had this happen the scope is new.
ANTI X ACTION -VH6 HD SCOPE ADJUSTMENT PROBLEM
- Thread starter ickes123
- Start date
Help Support Long Range Hunting Forum
Rick Richard
Well-Known Member
Have you checked your zero stop to ensure it is not bottomed out on the pin before it is actually bottomed out?
Rick Richard
Well-Known Member
This explains better as to what I meant in my post. You just have to fast forward until you get to the Zero Stop instruction.
yes i pulled it off and the inside is out of adjustment when i manually turn it.
- Joined
- Oct 10, 2017
- Messages
- 489
Leupold warranty will cover it. If it's out of adjustment I'd suggest you turning it into Leupold and let them fix it.
Rick Richard
Well-Known Member
Oops my bad. I jumped to the conclusion that is was a Zeiss V6.
Thats what I'll do. was hoping I as missing something
- Joined
- Oct 10, 2017
- Messages
- 489
Would you post a picture of the set up? Get some good pics inside the rings, MOA rail etc. your scope isn't touching the barrel by chance is it?
I'm a 1/4 off barrel and scope rings height is the same on both rings. I have trouble posting pics. The rear integrated rail is higher on rear built into action
waspocrew
Well-Known Member
How many minutes of elevation do you have? Per Leupold, you should have 75 minutes of travel. I'd make sure the zero stop isn't engaged and count your total travel.
