Flintlock shooter
Well-Known Member
I use the billet one from MK Machining. Their throw levers are also very good.
Last edited:
-
If you are being asked to change your password, and unsure how to do it, follow these instructions. Click here
Anti cant device
- Thread starter Keystone7mm
- Start date
Help Support Long Range Hunting Forum
It depends on the the rifle. Some have the anti-cant device built in the scope cap (Nightforce rings). My CZ457's base has it built into it (.22's need love too). I also have the style that clamps onto the tube. Of course, like 338 dude says, first level the scope. Be meticulous about it.
DE sells angle cosine indicator with or without the anti-cant device or just the anti-cant scope rings. I've seen the Nightforce caps with anti-cant devices at the usual places on the internet (just bought a set from Midway or maybe it was Brownells. I hate when I'm off work for a holiday. It gets expesive)
I'm so used to checking for level that the rifles that don't have the anti-cant device still get checked (which is irritating at the time). "Appurtenances" when needed are handy.
My long range rifles also have angle cosine indicators. I saw a guy on YT shooting a nice Anschutz .22LR (nice = $3k) with Lapua's new extra long range .22 LR (not kidding, it's a thing). He was shooting 200 and 300 yards uphill at 30-40 degrees-ish. Not one time did heconsider mention that the bullet impact was going to be significantly lower if he didn't compensate for it.
I know that pain...I was demonstrating how accurate my .338 Edge was at deer camp a number of years ago. The "camp house" had been moved from the coast and was up on legs around 15'-20'. The views down three sendero's up there were awesome. I convinced the host to let me take a long shot on a target. Earlier that day we watched two Bobcats herd a rabbit to their dinner table. Range was about 300 yards and I was chomping at the bit to take a shot. The backdrop was bad. There were people down range in the brush somewhere. When we told the host about it he was skeptical that I could have hit a Bobcat at that range. He was probably right unless somehow I remembered to look at the angle cosine indicator.
It was mid-day and everyone was at the camp. He agreed, his son set up a 55 gallon drum with a duct tape cross for a bullseye. I ranged it at 700 yards. I still look at the photo below from time to time. I missed in the vertical by right at 7". Had I checked my angle cosine indicator, something not normally necessary near the Gulf Coast of TX, I'd have made the correction.
DE sells angle cosine indicator with or without the anti-cant device or just the anti-cant scope rings. I've seen the Nightforce caps with anti-cant devices at the usual places on the internet (just bought a set from Midway or maybe it was Brownells. I hate when I'm off work for a holiday. It gets expesive)
I'm so used to checking for level that the rifles that don't have the anti-cant device still get checked (which is irritating at the time). "Appurtenances" when needed are handy.
My long range rifles also have angle cosine indicators. I saw a guy on YT shooting a nice Anschutz .22LR (nice = $3k) with Lapua's new extra long range .22 LR (not kidding, it's a thing). He was shooting 200 and 300 yards uphill at 30-40 degrees-ish. Not one time did he
I know that pain...I was demonstrating how accurate my .338 Edge was at deer camp a number of years ago. The "camp house" had been moved from the coast and was up on legs around 15'-20'. The views down three sendero's up there were awesome. I convinced the host to let me take a long shot on a target. Earlier that day we watched two Bobcats herd a rabbit to their dinner table. Range was about 300 yards and I was chomping at the bit to take a shot. The backdrop was bad. There were people down range in the brush somewhere. When we told the host about it he was skeptical that I could have hit a Bobcat at that range. He was probably right unless somehow I remembered to look at the angle cosine indicator.
It was mid-day and everyone was at the camp. He agreed, his son set up a 55 gallon drum with a duct tape cross for a bullseye. I ranged it at 700 yards. I still look at the photo below from time to time. I missed in the vertical by right at 7". Had I checked my angle cosine indicator, something not normally necessary near the Gulf Coast of TX, I'd have made the correction.
DoneNOut
Well-Known Member
I'd only throw the level if it weren't working...
M&K machining! Look em up! Great company, exceptional prices! May find more if what you are looking for!
I use the Vortex Pro levels on all of my rifles, I like how thin and narrow they are and they don't look like a brick on your scope tube. Never had one move.
G'morning, I presently use Darrel Holland's and Flatline Ops Sniper X. The Sniper X has two (2) adjustment set screws (1 for folded and the other for extended) and is by far the easiest to set dead level and to secure to tube.
The Holland is similar design to Vortex (by comparing photos).
Flatline's vial is 2X plus the size of Holland's which for me is more quickly referenced.
I use my Leica Range finder or iPhone in lieu of on-board Cosine Angle device.
floyd kittrell
Well-Known Member
If they are set up correctly most any of them will work, I use Vortex on some. Also like the Nightforce bubble level scope rings best , very handy in that last few seconds before you make the shot. JMHO
Last edited:
Jeffrey Van Zandt
Well-Known Member
mine is in my stock right behind the tang before that i had a 20moa rail with it built in to the rear of the rail
I run the Flatline Ops Sniper-X on my 34mm tube. Expensive, but sweet. Wheeler Engineering makes a pretty good one also.
Accuracy 1st level. Nice thing is it's a ceramic bead not a bubble so under recoil it won't separate. It's not usually an issue but I have had that happen the odd time shooting steel and can be frustrating if trying to make quick follow up shots.
If your going with a bubble they all basically do the same thing. I like them to clamp on the tube they are easier to tune to the reticle that way IMO.
If your going with a bubble they all basically do the same thing. I like them to clamp on the tube they are easier to tune to the reticle that way IMO.
- Joined
- Nov 25, 2012
- Messages
- 314
I'm another fan of the Vortex Pro models. I have several rifles with them installed and my wife wouldn't be without one on her long range rig.
Ed
Ed
IHFarmer07
Well-Known Member
M and K, machining makes great products, but from the looks of things, I think the flat line optics halo-x would be my pick. I had inquired about the newest bubble level available from M and K, I have a hard time trying to figure out if the the bubble level will get obstructed by the elevation turret, they sent me pictures but if a person is looking through the scope and takes the non-dominant eye and looks at the level is it visible.
Too many manufacturers don't take in the account of how large some of these turrets are on scopes and they keep it too close to the scope tube. Imo, the level needs to extend to the end of the focus/parallax adjustment knob or just a little shy of that.
Too many manufacturers don't take in the account of how large some of these turrets are on scopes and they keep it too close to the scope tube. Imo, the level needs to extend to the end of the focus/parallax adjustment knob or just a little shy of that.
every scope is different. They can't possibly know this for every optic on the market. I'd figure that based on the pictures you got should be able to determine to a reasonable degree whether or not your turret would obstruct it.
