Rick Richard
Well-Known Member
To each their own, but Salt Bath annealing is not in my opinion an "involved process" and certainly no more dangerous than using an open flame method.
I have an amp maybe I should start a brass anealing businessJoe at Shooter's Bench in Boise, actually he's moving to Nampa, bought an AMP Annealer, and charges 15 cents per case. I found out about his service the day before I planned to buy an AMP. 200 cases for $30.
What about the shipping both ways? I am actually seriously considering thisJoe at Shooter's Bench in Boise, actually he's moving to Nampa, bought an AMP Annealer, and charges 15 cents per case. I found out about his service the day before I planned to buy an AMP. 200 cases for $30.
Maybe SB is as safe and easy as they say, tests say not its not effective and I already have the flame annealing worked out. The induction route has my attention though. I will be keeping an eye on that technology for a DIY auto feed version.Salt bath... how do you know it works?
Salt Bath Annealing - Does It Work? | Learn More | AMP
View the latest articles from AMP Annealing. Get tips and tricks from our R&D. Here we upload articles to provide your the best possible information on innovations in the annealing process.www.ampannealing.com
Trust the science...Salt bath... how do you know it works?
Salt Bath Annealing - Does It Work? | Learn More | AMP
View the latest articles from AMP Annealing. Get tips and tricks from our R&D. Here we upload articles to provide your the best possible information on innovations in the annealing process.www.ampannealing.com
I had the same follow up question, I'm guessing you pay shipping both ways ... it wouldn't take long to get to the point you could have just bought something like the annealeez.What about the shipping both ways? I am actually seriously considering this
Very true but I have invested approximately four times that much to do a top-notch job for myself just wondering if I can pay for my machine maybe make a few pennies for myself in the long runI had the same follow up question, I'm guessing you pay shipping both ways ... it wouldn't take long to get to the point you could have just bought something like the annealeez.
I have never tried salt bath anealing and like anything I believe results vary depending on the application but my main problem with salt bath anealing is the danger one drop of water or sweat and you have molten lava basically exploding right in front of you which scares the crap out of me even more than an open flame at my loading bench with powder in the same room I know I know but now what I need 2 different rooms to do my reloadingI'll be going with a DIY setup no matter what, haven't decided between SB or induction but i'll research both. SB seems to not be a "true" anneal but it sounds like the people doing it are still reaping the rewards of doing it so it's probably "good enough."
Found this thread for a DIY induction setup that's a lot more automated, but it's a pretty involved build out.
If I had the money invested into an AMP it's something I would seriously look into as well. The only hesitation I would have is having some sort of protection (insurance / LLC) in place as you are dealing in explosive territory. If someone uses brass you've annealed for them and has a catastrophic incident you need to be prepared to defend yourself and your livelihood.Very true but I have invested approximately four times that much to do a top-notch job for myself just wondering if I can pay for my machine maybe make a few pennies for myself in the long run
Never considered that although I have nothing to do and have no control with how much powder they put in I'm sure a lawyer could drag me through the mudIf I had the money invested into an AMP it's something I would seriously look into as well. The only hesitation I would have is having some sort of protection (insurance / LLC) in place as you are dealing in explosive territory. If someone uses brass you've annealed for them and has a catastrophic incident you need to be prepared to defend yourself and your livelihood.
I guess I would have to add some sort of disclaimer that I am not responsible for anything that results from the reloading processesNever considered that although I have nothing to do and have no control with how much powder they put in I'm sure a lawyer could drag me through the mud
Yeah a simple disclaimer may work, but I'd maybe have a lawyer look at it. If nothing else maybe the LLC to protect your personal estate from your business dealings. I don't think you'd ever have an issue man but like you said once lawyers get involved it wouldn't take much to drag you through the mud and if they could prove the brass was too weakened or whatever it could put you in a bad spot without some kind of protection.I guess I would have to add some sort of disclaimer that I am not responsible for anything that results from the reloading processes