All new SRS suppressor mounts

[JJMoody]

Blue locktite then freezer. It'll come off and clean up.

 

[chutinlead]

Blue locktite then freezer. It'll come off and clean up.

Yeah I even have a little stub I threaded 5/8-24 so I don't have to mess around with a barrel. Just haven't gotten around to it.

 

[livetohunt]

I've got several CB brakes and one currently stuck in my dominus.... so its been a direct thread can for 9 months because I don't feel like threadlocking it onto something just to get it out of the can and then back off.

Yep, that's why we did this.

We're also looking at making a HUB -> direct thread adaptor that doesn't have the normal hex head... it will have the same spanner wrench setup as our brakes. This would let us cut weight and reduce the HUB thickness by about .200". It would have a small hex on the internal side of the HUB to allow for removing from the barrel if it got stuck and the suppressor threaded off.

Ken

 

[livetohunt]

After the popularity of our CB / Banish Gold brakes... we've added the Mini to our lineup... its just the taper attachment, with no brake. This cuts weight and length, and comes in at a lower price point. Functionally, the brake doesn't make a measurable difference inside of the can, so if you're always shooting with the can on, this is a no brainer...

Ken

CB / BANISH GOLD MINI – Salmon River Solutions

www.salmonriversolutions.com

 

[Luckyshot7]

After the popularity of our CB / Banish Gold brakes... we've added the Mini to our lineup... its just the taper attachment, with no brake. This cuts weight and length, and comes in at a lower price point. Functionally, the brake doesn't make a measurable difference inside of the can, so if you're always shooting with the can on, this is a no brainer...

Ken

CB / BANISH GOLD MINI – Salmon River Solutions

www.salmonriversolutions.com

View attachment 642557

That is killer. I nearly bought a brake and dremeled it apart to accomplish this.