7mm-08 AI on Small Primer Brass

In a few of my 7-08 AIs, I use 42.8-43.0 grains of Varget, 162gr AMax, 24"brl, and get 2820-2835 fps
That is impressive when you think I am besting that by just over 100 fps and using almost 60gr. of IMR4831 in a 7 SAUM. That 7mm-08 is running pretty efficiently. That's what I am looking for.
 
That is impressive when you think I am besting that by just over 100 fps and using almost 60gr. of IMR4831 in a 7 SAUM. That 7mm-08 is running pretty efficiently. That's what I am looking for.
My favorite cartridge…I have 6, but sold that many too.
 
Just wanted to ask you guys how many 7mm-08 shooters use SRP brass when reloading either standard or AI? I asked the fellas at Alpha if they ever considered it and they said they never had a request for SRP 7mm-08 brass and I just found that strange.

I know I make mine out of .260 SRP Alpha brass. It isn't a big deal, I would just like the 7mm-08 head stamp since I have a .260 AI.
I ran across it once myself, but can't find the link anymore. I would love to find it.
 
Last edited:
10-4, that is what I was thinking too. I just found it strange that Alpha said they never had a request for 7mm-08 SP brass when just about everyone I speak with forms it out of small pocket brass. I think they make all the 7mm SAW brass on small pockets.

I can definitely do that too, it would just be nice to have the correct caliber on the head.
Many shooters like .243 SRP brass too…can't find any :-(
 
With my Stevens 200 that I bought used, I ran it as standard 7mm-08 for a few years.
Then reamed the chamber to 7mm-08AI.
Finally pulled the barrel off after 6.000 rounds that I put through it.

Except for Lapua, I've pretty much run every brand.
Never worried about SRP.

PPU (PVRI Partizan) was the best brass I used.
I use it for every cartridge that I can now.
 

Recent Posts

Top