7 prc

[dukslayer4051]

He guys, I'm new to the prc world and last yr I picked up a bugara 7mm prc and this yr got a seekins 7prc. I'm having issues with reloads getting stuck in the breach after firing. I have heard there is a clicker issue. I wasn't familiar with that nor have I ever had any of these problems with my other rounds that I load. Is there a way that this could be diagnosed if there is an issue with the gun or is there something else I can do to my reloads to get past it?

 

[cajun]

What brass are you using? It's a known issue with the clickers. It could also do what you describe if your chamber is a little tight.

 

[cajun]

The fix is to rent the AW reamer and open up the back of the chamber.

 

[dukslayer4051]

What brass are you using? It's a known issue with the clickers. It could also do what you describe if your chamber is a little tight.

Hornady brass, I ordered adg it's on the way but hornady is what I got for now. I don't have any issues with factory loads.

 

[cajun]

People seem to have less issues with Hornady.

 

[HandgunHTR]

How are you resizing your brass?

Did you fire factory ammo to get the brass, buy new, or buy once-fired?

Also, when you say "stuck in the breach", do you mean that you can rotate the bolt and it won't pull the brass? Or do you mean you have very hard bolt lift?