• If you are being asked to change your password, and unsure how to do it, follow these instructions. Click here

6mm arc

I haven't got a bolt knob yet as I'm still working on the gun. I ordered the bottom metel for it and got it in, next I will take it out of it's Howa classis it came in. I'll can now order my McMillan stock for it as the bottom metel was the hold up for replacing the classis with a McMillan stock.
Do you reload?
 
I haven't got a bolt knob yet as I'm still working on the gun. I ordered the bottom metel for it and got it in, next I will take it out of it's Howa classis it came in. I'll can now order my McMillan stock for it as the bottom metel was the hold up for replacing the classis with a McMillan stock.
Do you reload?
Yes I do! Im in CA and have only loaded lead free in it so far, tho I plan to run some 108eldms for practice.

Ive shot 95LRXs and 88gr MTHs from cutting edge and just to see and compare got a box of factory 108elms and they shot good as well at 2525 in 20".

I would have faster loads worked up but I had a burr on the bolt face (ejector hole) that was giving me false pressure signs even at starting loadd and it took me quite a while to figure it out. By then it was close to season so I went with a charge I knew wouldnt flatten primers and ran it. 95LRX at 2694. Killed a nice blacktail at just under 300.

I have a blind mag solid floorplate from Jefferson on mine, they were out of the hinged floorplate. The factory setup cracked at the bolt hole when torquing stock to specs.
 
I wouldn't like the fact of only loading Barnes type bullets, but I will say they are great for hunting as I have used them on deer and elk. But for paper I have had great luck with the Berger bullets. For the 6 ARC the 90 target & 95gr VLD, I did run some 105gr to 109gr but the 90 & 95gr work best with me.
 
I purchased a six arc in a Ruger American Gen 2 a little over 4 months ago. I bought the standard with a 20-in barrel.

I love reading on this forum, but to be honest, I do not hand load nor do I shoot really long range, although I bought this gun so that I could begin to shoot long range eventually.

I found the gun to be really really nice, and I used an aftermarket trigger spring which brought the trigger down to 1 lb 15 oz. For the $12 I paid, it was an easy and worthwhile upgrade. It is not a Timney, but it serves my purpose just fine.

From the factory the gun is slightly front heavy and I enjoy the stock although I wish it had more of a vertical grip. An Athlon Aries ETR 3-18x50 sits on top and in my gun the 103 grain ELD-Xs seem to be the most accurate, shooting under MOA at 100 yd and 200 yards as long as I do my part well. I added an MDT bipod and removed the factory muzzle brake and installed a suppressor. This made it more front-heavy.

Ruger sells a weight kit for the hollow butt of the stock. With the full amount of weights, the gun is a bit heavy but balances pretty much perfectly. The way it sits it is just over 11 lb but that makes recoil pretty much non-existent, nearly on par with my 17 HMR and my 22 win mag.

Finally, I eliminated the magazine and installed Ruger's single shot adapter. I do wish the adapter was solid on the bottom as it is hollow, but it makes feeding even slicker than it was from the factory and I like that it is completely flush. When I'm at the range it is no big deal to load individually. And I guess that when hunting knowing I only have a single shot means that I take my time and make sure that I do what I need to in order to be as accurate as possible.

I looked at the same guns that have been mentioned here in this thread. It came down to this or the Howa, but I purchased the Ruger from my local gunsmith for $519 and I could not touch any of the other guns other than the Savage axis for anywhere near the price I paid. I bought the weight set on eBay for $40 and the single shot adapter for another 20 dollars. As I said the trigger spring was $12 and the bipod was 90 dollars. The scope was just over $600 including tax from scopelist.com and the suppressor is for a 30 mm and will be replaced by a 6 mm OCL Polonium that is currently back ordered and will cost me another $500 (plus stamp).

It has begun to get expensive considering I originally purchased the gun for under $520, but I have a very accurate very well balanced extremely light recoiling 500 yd whitetail gun that is suppressed with very good glass for under $1,800! To me this is an acceptable price for a package like this.

The others are probably also fine guns, but I am quite impressed and very happy with this purchase and build.
 
Last edited:
Top