6 vs 6.5 Creedmoor opinions wanted

How hard you stepping on the 25cm for that speed? I tested rl26, and it was the only thing capable of running above 2930 without significant case expansion. Believe 3080 was psi signs from a 26in barrel. I know all barrels are different, brass and chamber all makes a difference.

The 6cm runs a mild load with 112mb, which has a 308g7, 2950-3000 very easily. Similar dope as your 25, and the prc referenced, with even less recoil. I run the 112 from an 18in barrel with 44.5gr rl26 at 2950. Case webs after firing are 47025 from 46975 sized. I ran up to 46.2gr over 3040 before bolt lift, ejector marks.
Not at all.
I have two 25CMs and a 6CM.

25CM Hunter
26" 1:7" Bartlein 400MODBB CF
Alpha 25CM SRP
CCI BR4
42.6gr H4350
133 Elite
2975fps


25CM target
26" 1:7.5" Brux
Lapua 6CM SRP necked up to .257
Fed GM205M
42.4gr H4350
135 LRHT
2986fps


6CM
24" 1:7.5" Proof CF
Lapua 6.5CM SRP necked down to 6mm (long before 6CM brass was available)
Fed GM205M
42.0gr H4350
105 Hyb
3188fps
 
Meanwhile, I'm over here shooting the .308 win and not a care in the world about barrel life. I dropped a cow elk with it at 600 yards last week so the distance thing is fine….for me. With a suppressor, recoil is manageable.

If I had to choose between the two you mentioned…6.5 CM.
Brand new M24 .308 here.
My last true model 700,M24 went just over 6000 rounds before it started shooting over over one MOA. just got the new barrel spun on shoots great using M118
 

Attachments

  • IMG_6816.jpeg
    IMG_6816.jpeg
    344.6 KB · Views: 4
  • IMG_6813.jpeg
    IMG_6813.jpeg
    349.9 KB · Views: 5
Not at all.
I have two 25CMs and a 6CM.

25CM Hunter
26" 1:7" Bartlein 400MODBB CF
Alpha 25CM SRP
CCI BR4
42.6gr H4350
133 Elite
2975fps


25CM target
26" 1:7.5" Brux
Lapua 6CM SRP necked up to .257
Fed GM205M
42.4gr H4350
135 LRHT
2986fps


6CM
24" 1:7.5" Proof CF
Lapua 6.5CM SRP necked down to 6mm (long before 6CM brass was available)
Fed GM205M
42.0gr H4350
105 Hyb
3188fps
133 at 3k is mighty impressive. I'm thinking that's got to be in the 70k psi range though. That SRP brass sure helps hide pressure.
 
Top