6.5 prc FL sizing help

[JAYgs8163]

This is all explained in detail in the linked thread in post 15. Those using the AW2 reamer do not need a special die. I use the Redding dies

 

[BrentM]

Does the whidden die fix the issue on the adg and lapua brass?

Anyone have the issue with Peterson brass?

Yea it does. It's like having a small base die

 

[Txcowboy50]

Does anyone just neck size the 6.5 PRC AG brass? Just thinking this might work.

 

[spin-one]

Hey all,
Wondering what FL sizing dies people are using for 6.5 prc only please. I'm having issues with my Redding FL not sizing enough and I'm getting really stiff bolt lifts on about every 4th to 5th case reguardless of my best efforts. Even one cartridge stuck in the bore.
I'm using ADG brass for reference. It's a brand new proof elevation mtr with only 50 rounds through it. Zermatt action and proof barrel. Thanks for the help

The PRC SAMMI chamber tolerances are too close. ADG brass has the most problems but other brass can have the same issue. i ended up purchasing a custom reamer from Manson Precision and had my smith enlarge the chamber. This solved the problem with my ADG brass.

Scott

 

[Sending156s]

It may happen tomorrow, but I've experienced no problems owning 2 65 PRCs. I sold my ADG, Nosler, etc when I received my Lapua. I use custom sized Whidden die's.