338 378 weatherby barrel length

[MagnumManiac]

Have used numerous Hart and Lilja button rifled barrels myself, they are both superbly accurate if lapped, order it with a finished length of 34", you will be impressed with the velocity.
I have 8g more capacity with my wildcat, throat is longer too.

Cheers.

 

[JamesWilson5]

I just looked at Hart's website, and their barrels are button pulled.
Food for thought- if you are wanting all you can get from that case, maybe consider a Bartlien.
Gregg

I was told by gunsmith bartlen makes good barrel

 

[JamesWilson5]

Is this a standard weatherby chamber or custom one.

Yes it's factory

 

[JamesWilson5]

while I am new to this cartridge, but from my FB page for 338-378 shooters are getting 3k with 300 gr ers in factory form rifles.
I am currently playing with 267 HHT and 265 ABLR and 285 ELDM. I MAY out of curiosity give THOSE 300's a run if I have enough spin in my tube. Which I am not exactly sure.
All I know is that it's gonna be a fun ride
But if i ever shoot out this barrel it will be redone with a 28" Bartlein.

What are u getting in the 265 ablr ?

 

[JamesWilson5]

I prefer 32"-34" finished lengths in that size cartridge.
My shortest barrel running my 300-416 Rigby Improved is 30", changed the chamber design in 2022 and very happy with it.
My 338's are running 265's and 300's at above 3300fps and 3150fps respectively, yours may be lower.
I am going to 33XC and 37XC in the near future on these instead of my wildcat, brass will be better in the long run, even though they are not volume shooters by any means.

Cheers.

Who can do 32 to 34 inch barrel length finish my gun smith can only do 30

 

[6.5x300 WBY]

What are u getting in the 265 ablr ?

I'll let you know tomorrow. I have a ladder loaded up with Retumbo. Hope to be on the range tomorrow for some fun

 

[MagnumManiac]

Who can do 32 to 34 inch barrel length finish my gun smith can only do 30

Bartlein, Brux, and others if you search. You will have to pay for extra length though. My supplier has 36" blanks that finish at 34".

Cheers.

 

[Michael Lares]

Is this a standard weatherby chamber or custom one.

Factory chamber specs. That's working for me for now. Knew a guy I bought custom 325 grn bullets from years ago. He was shooting cheytac necked down to .338 with those bullets he sold me. He was running .250" jump and told me worked good. So I went that direction on my Weatherby.
Also, when I was looking for new barrel talked to Dan Lilja and he advised not to go over 30" with Mark V like I have. So that's what I did. Dan has a lot of experience, great help.