.308 AR Barrel

[HeyWho]

be very afraid of the wc 308's (or it might be just wilson)! if it states "rifle length gas", you might be in for a rollercoaster ride! if you build it yourself if where the issue lies. getting the correct gas tube length as another forum there's guy that went thru many lengths (pun intended) to get a correct length. rifle gas length doesn't match dpms or armalite and sometimes doesn't match their own as it changes. either it was on this forum or sniper's hide? good hunting!

The WC I ordered is .223 Wylde not .308 - still problem with that you think or just the .308 model? I can easily return it, its from Brownells and they are decent to deal with on returns usually.

 

[HeyWho]

Interesting info apparently for the Wilson Combat .308 AR Barrels:
The Wilson 20" 308 caliber barrel will require the Wilson 15.5" rifle gas tube.
Not the standard rifle gas tube which is 15.125" commonly used with other manufactures.
The 15.5" gas tube will not work with standard rifles either. It will not allow the BCG to fully engage.
Gas block size is 0.875"

 

[UncleDano]

Interesting info apparently for the Wilson Combat .308 AR Barrels:
The Wilson 20" 308 caliber barrel will require the Wilson 15.5" rifle gas tube.
Not the standard rifle gas tube which is 15.125" commonly used with other manufactures.
The 15.5" gas tube will not work with standard rifles either. It will not allow the BCG to fully engage.
Gas block size is 0.875"

It is not just with Wilson Combat barrels. 15.5" is the original Armalite length. There are some tubes that are 15.2" & 15.3". The 15.125" is for AR15 use. You want to pick the longest one you can find for best performance. It should reach no less than 1/2 way into the cam pin recess or even better 3/4 into the recess. ____SORRY, I GUESS THIS IS OFF TOPIC.

 

[HeyWho]

It is not just with Wilson Combat barrels. 15.5" is the original Armalite length. There are some tubes that are 15.2" & 15.3". The 15.125" is for AR15 use. You want to pick the longest one you can find for best performance. It should reach no less than 1/2 way into the cam pin recess or even better 3/4 into the recess. ____SORRY, I GUESS THIS IS OFF TOPIC.

Good info. I have not heard that before, thanks for the 411.

 

[ARlife4me]

It is not just with Wilson Combat barrels. 15.5" is the original Armalite length. There are some tubes that are 15.2" & 15.3". The 15.125" is for AR15 use. You want to pick the longest one you can find for best performance. It should reach no less than 1/2 way into the cam pin recess or even better 3/4 into the recess. ____SORRY, I GUESS THIS IS OFF TOPIC.

the 308 he's getting is a dpms pattern as for the wc barrel is 223/5.56.

 

[ARlife4me]

Interesting info apparently for the Wilson Combat .308 AR Barrels:
The Wilson 20" 308 caliber barrel will require the Wilson 15.5" rifle gas tube.
Not the standard rifle gas tube which is 15.125" commonly used with other manufactures.
The 15.5" gas tube will not work with standard rifles either. It will not allow the BCG to fully engage.
Gas block size is 0.875"

wc doesn't post good info about which gad length they have for that specific barrel as it has changed. whether the block size is larger or smaller it doesn't help having a straight or bent tube! so, gith dpms, aramalite and wc there could be just 3 different rifle lengths, but wc has had and still may have 3 for their own? wc might even supply the wrong length when or if you order from them? it has happened before! i'm sure they make great products, but their ar10/lr308/etc is nuts! makes me wonder if they just drill/ream the gas port in the wrong place?

 

[Brathany]

Yeah, this thing shoots great, I just need somebody to carry it for me! View attachment 635203

I've seen enough ARs to last 3 lifetimes, so I immediately noticed the nice bench. I've built several and an appreciator of gun benches!

 

[Brathany]

be very afraid of the wc 308's (or it might be just wilson)! if it states "rifle length gas", you might be in for a rollercoaster ride! if you build it yourself if where the issue lies. getting the correct gas tube length as another forum there's guy that went thru many lengths (pun intended) to get a correct length. rifle gas length doesn't match dpms or armalite and sometimes doesn't match their own as it changes. either it was on this forum or sniper's hide? good hunting!

Good call here. I just order the length gas tube from the same place making the barrel. I've been through the mismatched gas tube lengths a few times. So I made it SOP to buy same, same.

 

[Brathany]

To be certain I'd need to dismantle a round (isn't any issue).

If you have a kinetic bullet puller just smack it out long and use the gravity method to find the point the round falls free after seating little by little.

 

[ARlife4me]

If you have a kinetic bullet puller just smack it out long and use the gravity method to find the point the round falls free after seating little by little.

Wouldn't be without 1 being a handloader.

 

[HeyWho]

Heys guys - Anyone looking for some Federal 210-Match LRP? Hit me up I just picked up 3,000 of them online.

Gone sold out @ $115 a box.

 

[Taj]

Good call here. I just order the length gas tube from the same place making the barrel. I've been through the mismatched gas tube lengths a few times. So I made it SOP to buy same, same.

I've seen enough ARs to last 3 lifetimes, so I immediately noticed the nice bench. I've built several and an appreciator of gun benches!

Thanks Pal. Yeah I get it on the ARs'. Me too.

 

[liber]

I recently purchased a Criterion .308 match barrel from Fulton Armory, and built a rifle using a DPMS slick sided match upper which I converted to a side charger handle. Brother does this barrel shoot. It shoots every bit as well as a couple of Kreiger's I have on other rifles. This was shot during break-in ( 100 yrds) and with Remington Match, which does not have the best reputation. IT does even better with Federal Match. I haven't even tried to work up a handload for yet. The Rem Match is loaded with 168 grain SMK's. View attachment 635016

I also have a Criterion LR-308 24" barrel, and it shoots XLNT also. I wish I had a Rem700 Criterion, but for 308 all I have is a Remington stainless takeoff barrel. It is 24" but looks like a pencil next to the Criterion. I think I have about 600-700 rounds through that rifle. Mine is definitely sub MOA also. I have a 16" PSA 308 barrel, it's a cheapy, it's like 1 MOA, but I've put over 2000 rounds through it and it's pretty consistent with 1 MOA, but nothing to write home about.

Honestly, even if I was to shoot 3 MOA or beyond that, as long as I can put down game with it, even if my aim is off, I'm ok with it.