I've been extremely happy with adg/gunwerks brass. I use it in my 338 rum. 300 bergers @ 2830fps 1/4" moa and zero psi signs 92.2 N570. Bertram is garbage in my opinion and will never buy it again. I've had to return 6.5 saum, 300 norma and 300wsm. My friends 28N brass was so bad you could clearly see how inconsistent neck thickness was with naked eye.
-
If you are being asked to change your password, and unsure how to do it, follow these instructions. Click here
.300rum .338rum brass
- Thread starter clemens
- Start date
Help Support Long Range Hunting Forum
I have heard the same thing on Bertram brass . I have few a buddy sent over to try in the 338 Edge but havent got a chance .
Rum Man
clemens
Well-Known Member
I'll keep that in mind
clemens
Well-Known Member
Doesnt it always. Having fun, hobbies, and inexpensive are not 3 words that mix well.
BAKPAKR
Well-Known Member
I have two 300 RUMs. One is getting ready to become a 30 Nosler. Had Bartlein announced its carbon-wrapped barrel before I bought my # 3 30 cal barrel, brass, and stock, I think I would be having a 9.3 twist 338 RUM in the works. Those 260 gr Hammers sure look like they would be great elk bullets.
brentc
Well-Known Member
- Joined
- Apr 3, 2009
- Messages
- 2,644
I too think Bertram is over rated. The primer pockets are too deep and the cases have inconsistent neck thickness and case capacity. The BB cases are too expensive to mess with their inconsistencies.
Remington is decent if you can get the pockets to hold primers for more than four loadings with full pressure loads.
ADG is good brass across the board, but I get the same accuracy with an additional 50 fps with Norma. For the 338 RUM, the Nosler cases have been excellent.
Remington is decent if you can get the pockets to hold primers for more than four loadings with full pressure loads.
ADG is good brass across the board, but I get the same accuracy with an additional 50 fps with Norma. For the 338 RUM, the Nosler cases have been excellent.
Last edited:
I may have some 1x fired 300 and 338 Remington stuff. PM me if interested and I will see what I have.
Sanford338
Well-Known Member
I haven't had any problems getting... (338RUM)
Rebell
Well-Known Member
I have two 300 RUMs and use Remington brass in one and Nosler in the other and have not had an issue finding the brass. I agree that you should get one of each!
I must have sold all the 338 stuff. Here is what I have left in 300 rum
RP 47pcs of new
RP 23pcs 1X fired
Norma 41 pcs 1X fired
nosler 8 pcs of 1X fired
72 pcs 1X fired
47 new RP
$115 Shipped
Not wanting to split it up.
RP 47pcs of new
RP 23pcs 1X fired
Norma 41 pcs 1X fired
nosler 8 pcs of 1X fired
72 pcs 1X fired
47 new RP
$115 Shipped
Not wanting to split it up.
bigtuna431
Well-Known Member
I feel humbled. I have one 338RUM in a Rem 700LSS and had a heck of a time finding it. 'Cause I picked up 360 rounds of custom manufactured ammo out of a auction and didn't have a thing to shoot it in. Finally found the LSS and still haven't shot it. LOL But I did enjoy the hunt..
You better get both !
Just got back from the 1 mile shoot !
Several hit on a 12" steel target with the Lrh parts build 300 Rum . Danced all around the milk jug but couldnt hit the darn thing !
Then pulled out the 338 Edge and shot twice with misses then Splash goes the Jug !
Great day with all the guys !
Rum Man
Just got back from the 1 mile shoot !
Several hit on a 12" steel target with the Lrh parts build 300 Rum . Danced all around the milk jug but couldnt hit the darn thing !
Then pulled out the 338 Edge and shot twice with misses then Splash goes the Jug !
Great day with all the guys !
Rum Man
