• If you are being asked to change your password, and unsure how to do it, follow these instructions. Click here

300 Weatherby info

derickd

Well-Known Member
Joined
Jun 16, 2011
Messages
297
I'm looking at trading for this gun locally and I know nothing about Weatherby can I get some help on what it is and what's it worth mark v stainless thanks for the info
 

Attachments

  • IMG_0462.jpeg
    IMG_0462.jpeg
    390.6 KB · Views: 31
Looks like a Mark V stainless that someone put in a Bell & Carlson stock.

Nothing wrong with it, as we have some in the same configuration.
I'd bed the action and tune the trigger, and it probably will shoot very well.
 
That would be uncommon, but Weatherby did some uncommon things with a few special models for distributors.

If it's from the factory, the stock will likely have aluminum blocks only at the action screws. If the B&C was added later, then it will have a full action bedding block. You usually have to remove the stock to see the difference between the two.

Any other photos?
 
I had one just like that it that I sent to scorehi in New Mexico that added the BC exact stock, tapped the scope mounts to the larger M700 screws , it shoots amazing! I was offered a good price for a friend that wanted it so he has it now and it's still shooting 215hybrids into 1/2 groups. He is an outfitter and the rifle gets used by different clients that come with rifles that can't shoot long distance confidently.
 
Last edited:
I had one just like that it that I sent to scorehi in New Mexico that added the BC exact stock, tapped the scope mounts to the larger M700 screws , it shoots amazing! I was offered a good price for a friend that wanted it so he has it now and it's still shooting 215hybrids into 1/2 groups. He is an outfitter and the rifle gets used my different clients that come with rifles that can't shoot long distance confidently.
My serial was SS006214
 
If you watch, stainless Mark V rifles on GB are available for $850-1000, often advertised for more but don't sell too fast. With low usage you can think $1000. Of course, you then add shipping and transfer fee if you buy on GB. You get to avoid that if it's local.
If it's a factory stock add $150-ish. A new B&C is about $300 but once installed on a rifle is more like a $200-250 addition.

Any box or papers?
 

Recent Posts

Top