-
If you are being asked to change your password, and unsure how to do it, follow these instructions. Click here
300 Weatherby info
- Thread starter derickd
- Start date
Help Support Long Range Hunting Forum
Dr. Vette
Well-Known Member
Looks like a Mark V stainless that someone put in a Bell & Carlson stock.
Nothing wrong with it, as we have some in the same configuration.
I'd bed the action and tune the trigger, and it probably will shoot very well.
Nothing wrong with it, as we have some in the same configuration.
I'd bed the action and tune the trigger, and it probably will shoot very well.
What's it's worth
Dr. Vette
Well-Known Member
That would be uncommon, but Weatherby did some uncommon things with a few special models for distributors.
If it's from the factory, the stock will likely have aluminum blocks only at the action screws. If the B&C was added later, then it will have a full action bedding block. You usually have to remove the stock to see the difference between the two.
Any other photos?
If it's from the factory, the stock will likely have aluminum blocks only at the action screws. If the B&C was added later, then it will have a full action bedding block. You usually have to remove the stock to see the difference between the two.
Any other photos?
Attachments
I had one just like that it that I sent to scorehi in New Mexico that added the BC exact stock, tapped the scope mounts to the larger M700 screws , it shoots amazing! I was offered a good price for a friend that wanted it so he has it now and it's still shooting 215hybrids into 1/2 groups. He is an outfitter and the rifle gets used by different clients that come with rifles that can't shoot long distance confidently.
Last edited:
My serial was SS006214
It's a decent deal under 1200.00, they probably want 1500-1700, but Dr Vette knows more! He's answered my questions in the past . 
