Dangit, Rich. I thought the 7mm SS was the unicorn. Now you got this one out and Im gonna have to get another barrel so I can play too!!
3010' with a 215 is nuts. Im getting 2900 with the 195 eol. I might out run ya in the long run but hunting with a 215 at 3000' and outperforming the 7mm unless out to extreme yardages due to BC is crazy good. I mean sure, I can run a hot load like it takes to get that 300 up to 3000 and probably get 2980-3000 with some decent primer cratering, but forget it. Ill just build a new gun now >
A great write up with a new case, powder bullet combo 2970fps with a case that small will make alot of guys take note well done. I wonder what it would do in a 22-24 inch barrel the perfect woods rifle?
I was ecstatic as this was my furthest kill to date!!! The one shot with the 215 Berger was perfectly behind the shoulder and had a racket ball sized exit at 1110 YARDS!!!
Dang man, don't work your way out or anything, just throw down a 1000+ gun) That is a potent rig you have put together there and your driving it rather well
A great write up with a new case, powder bullet combo 2970fps with a case that small will make alot of guys take note well done. I wonder what it would do in a 22-24 inch barrel the perfect woods rifle?
Awesome shot and amazing numbers. What is your OAL after redoing the chamber? Still a short action cartridge? Thanks.
I don't want to sound like a jerk, I am new here and do not want to step on any toes or seem ungrateful for all of the effort put into this project. I thought I may have missed something so I have re-read the entire thread to see if this would work for my application. Perhaps I have misunderstood but it sounds like this is being testing in a Tikka T3 short action extended to a long action with a COAL of 3.01". Maybe I have missed something but this doesn't sound like it will fit in a Short action magazine like the other SS cartridges. I am not seeing the advantage of this particular SS over a 300wsm is it needs to be fed from a long action, long magazine. This seems to be the new direction many people are trying with the T3 and long magazines (seating the wsm long). I have greatly enjoyed following the adventure nonetheless but please let me know if I have it wrong. And thank you for trying to push cartridge design forward!
I don't want to sound like a jerk, I am new here and do not want to step on any toes or seem ungrateful for all of the effort put into this project. I thought I may have missed something so I have re-read the entire thread to see if this would work for my application. Perhaps I have misunderstood but it sounds like this is being testing in a Tikka T3 short action extended to a long action with a COAL of 3.01". Maybe I have missed something but this doesn't sound like it will fit in a Short action magazine like the other SS cartridges. I am not seeing the advantage of this particular SS over a 300wsm is it needs to be fed from a long action, long magazine. This seems to be the new direction many people are trying with the T3 and long magazines (seating the wsm long). I have greatly enjoyed following the adventure nonetheless but please let me know if I have it wrong. And thank you for trying to push cartridge design forward!