28 nosler

[jasonco]

28 Nosler has a node above 3150fps, with 180-195 grain bullets, in my 26" 1/9 barrel and still there in the new 27" 1/8 barrel. The limiting factor was the Nosler case, that not a factor anymore with Peterson or Hornady brass, in my rifle.

 

[Thomas Putman]

thanks everyone

 

[chaz440]

Retumbo or us869

 

[L.Sherm]

Don't be surprised after you get 200 rounds on your barrel that the 162's dont come apart IF you have an 8 twist in the velocities the 28 will push them

 

[Backcountry sports]

If you can find it, ADG (Atlas Development Group) brass for the 28 Nosler is superb. I was able to develop a very good load using that brass, and it is durable.
[/QUOTEgreat adg brass is great when you can get it

 

[jgoriak]

I run nosler brass, have gotten so far 7 rounds out of each brass using N570 powerder with 195 EOL's and using 79.6 gr powder with 215 federat match primers. I shoot 3039 FPS average and found it to be the most accurate load ive tried out of this rifle with a 27" barral and 1/8 twist. Ive tried the H1000 with about 5 different loads and didnt like either one. For hunting under 300 yard it would be fine, but for stretching out long distance I found it inconsistant, dirty, and had to use more powder to get the same speeds. Just my opinion.

 

[KMLampson]

Precision Reloading has ADG 28 Nosler brass in stock, i purchased two boxes this AM, you might want to jump on this considering availability these days.....

 

[L.Sherm]

H1000 dirty?

 

[Orange Dust]

i'm going to do my own reloading an decided to use the hornady 162 eld-x bullet. does anyone have an idea witch powder will be a good match . any help will be appreciated

I shoot that bullet with IMR8133 in mine. Stay away from R33 with this bullet. R33 will form a carbon ring in 20rds and is very dirty with this bullet weight. 8133 turned very low SD's and is very clean burning with very high velocity.

 

[Thomas Putman]

H1000 dirty?

 

[brguide]

Peterson blows all others away.

 

[jgoriak]

H1000 dirty?

compared to the N570 thats what I found. I know its not considered a "dirty" powder compared to many others, and maybe I was using too much powder, i dont know. But pulling a patch after each shot I noticed its a lot blacker than pulling a patch after every shot of N570.

 

[Thomas Putman]

I shoot that bullet with IMR8133 in mine. Stay away from R33 with this bullet. R33 will form a carbon ring in 20rds and is very dirty with this bullet weight. 8133 turned very low SD's and is very clean burning with very high velocity.

about how much8133

 

[Orange Dust]

about how much8133

I found a node right at book max. Start a grain or two above min though. I had a slight hangfire with the min load. I am using 215M primers.