28 Nosler , h1000 and 180 Burger hybrids

Are you shooting off of bipods or a bag , 7 Prc don't shoot good off of bipods they have a lot of torque over try a bag or sled
Shooting out of a padded vice setup as well as off a front adjustable rest and rear bay. Worked good with all my STW load developments. Didn't make it out today, tomorrow morning.
 
Good luck and let me no how it goes
Still inconsistent and no pressure signs. This barrel is wearing incredibly fast, and I'm allowing ample cool down. At 189 rounds and firecracking looks like my STW with 2500 rounds. Good note, My brass is growing to fill some of the void where carbon ring is! Pulled the scope as I'm feeling something is amiss, possibly the parallax.
 

Attachments

  • 75278782135__56609FD1-61E8-4E76-9F8C-214E2135D309.jpeg
    75278782135__56609FD1-61E8-4E76-9F8C-214E2135D309.jpeg
    215.8 KB · Views: 18
  • IMG_2790.jpeg
    IMG_2790.jpeg
    245.8 KB · Views: 21
  • IMG_2791.jpeg
    IMG_2791.jpeg
    248.7 KB · Views: 21
Still inconsistent and no pressure signs. This barrel is wearing incredibly fast, and I'm allowing ample cool down. At 189 rounds and firecracking looks like my STW with 2500 rounds. Good note, My brass is growing to fill some of the void where carbon ring is! Pulled the scope as I'm feeling something is amiss, possibly the parallax.
I would take 26" target and put a small 1" target at the bottom and then put a plumb line up the target shoot the bottom target then dieal your scope up 20 inches and shoot the same bottom target again and see where your POI is that should tell you if your scope is set right
 
I would take 26" target and put a small 1" target at the bottom and then put a plumb line up the target shoot the bottom target then dieal your scope up 20 inches and shoot the same bottom target again and see where your POI is that should tell you if your scope is set right
Well, kind of embarrassing here. It appears I've lost the ability to put holes in paper all of a sudden. At 400 on steel plates 2" grouping, 2.25" at 500. That will have to do for this season. Thanks for the help. Still a carbon beast though. Target panic has never been a thing for me, maybe my eyes are getting old.
 

Attachments

  • IMG_2802.jpeg
    IMG_2802.jpeg
    416.2 KB · Views: 22
Well, kind of embarrassing here. It appears I've lost the ability to put holes in paper all of a sudden. At 400 on steel plates 2" grouping, 2.25" at 500. That will have to do for this season. Thanks for the help. Still a carbon beast though. Target panic has never been a thing for me, maybe my eyes are getting old.
That's good I'm glad you got it figured out and good luck on you hunts
 
Top