270 Win Found My Recipe

[Capt Nag]

I would have posted this earlier, but couldn't figure out how to upload. But here ya go.
Pure Joy!

 

[Rocketeer77]

Shot my 270 Remington 700 ADL with 24 inch barrel at the range today and found my recipe. I am going to run 20 and make sure it's repeatable and make scope adjustments.

130 gr Sierra SBT Gameking
55 gr IMR4350 (max load)
Federal 210 primer
Remington brass

That's a three shot group at 100 yards! The others grains below and above where nowhere as tight.

Same projectile
Sako Finnbear 24.5" OEM barrel, using 59.5gr of RL19 doing 3,200fps this rifle does under one MOA all day. Still a great calibre IMHO

 

[Rocketeer77]

Same projectile
Sako Finnbear 24.5" OEM barrel, using 59.5gr of RL19 doing 3,200fps this rifle does under one MOA all day. Still a great calibre IMHO

 

[tomcat818]

Shot my 270 Remington 700 ADL with 24 inch barrel at the range today and found my recipe. I am going to run 20 and make sure it's repeatable and make scope adjustments.

130 gr Sierra SBT Gameking
55 gr IMR4350 (max load)
Federal 210 primer
Remington brass

That's a three shot group at 100 yards! The others grains below and above where nowhere as tight.

Very nice group great feeling to walk up and see a nice tight one on the paper!
Recently pulled out my grandmother's '69 Rem 700 ADL 270 win to work up a load and was pleasantly surprised considering it shot factory loads below average. This rifle has ~.170" of freebore so the factory loads were jumping a ton. I moved the CBTO out about .120" at about .050" off the lands and this node happened and the charge weights before and after shot below MOA:
Note: this load is close to max always start low and work your way up.

 

[SecretSquirrel38]

Are we talking about 270 or '06 with your recipe? It's early but I've reread your post a couple of times and I want to make sure for myself and for everyone else that reads it.

270. Someone jumped on about 30-06.