25-06 AI Load help

First off I'd like to thank all of you for your insights, advice, and sharing of experiences. Big shout out to Phil Rizzo for the suggestion to move to a magnum primer.
I loadedsome stuff with fed215 primers starting at 55.5 gr and stepping up in .2 gr increments to 56.1 gr as I didn't want to swing too hard based on my previous issues. The first 3 groups were all ~3120-3140 range 2 shots close to the other and 1 flier. Last group was right at 3150 @ ~ 1". I feel like there's quite a bit more on the table but as a few have pointed out 3150 is what's expected on the increase from rem to ackley and this isn't my main rifle so I'm going to call it good for now and move on to the 280 Ai and 7mm PRC.
Should i expect similar issues with the 280 or is it more forgiving since it isn't as overbore? Fed 210 or 215 primers?
 
Last point, I use Win 760 in my .25/06. All the other choices except H4831 are solid achievers.
With the 280A1, I find it as easy as loading for a .30/06. In fact, you can expect the same/similar velocites for equal bullet weights and barrel lengths.
 
First off I'd like to thank all of you for your insights, advice, and sharing of experiences. Big shout out to Phil Rizzo for the suggestion to move to a magnum primer.
I loadedsome stuff with fed215 primers starting at 55.5 gr and stepping up in .2 gr increments to 56.1 gr as I didn't want to swing too hard based on my previous issues. The first 3 groups were all ~3120-3140 range 2 shots close to the other and 1 flier. Last group was right at 3150 @ ~ 1". I feel like there's quite a bit more on the table but as a few have pointed out 3150 is what's expected on the increase from rem to ackley and this isn't my main rifle so I'm going to call it good for now and move on to the 280 Ai and 7mm PRC.
Should i expect similar issues with the 280 or is it more forgiving since it isn't as overbore? Fed 210 or 215 primers?

Your welcome.
I have no experience with 280AI but plenty here do.
Its a famous over achiever.
 
One of the older Sierra books had it included.
3 ring binder
FYI
Possible one of these? I'm pretty sure I have all of Sierra's manuals. Can you think of which one it was? Cheers
 

Attachments

  • Sierra 4.jpg
    Sierra 4.jpg
    215.5 KB · Views: 0
  • Sierra 3.jpg
    Sierra 3.jpg
    200 KB · Views: 0
  • Sierra 2.jpg
    Sierra 2.jpg
    229.4 KB · Views: 0
  • Sierra 1.jpg
    Sierra 1.jpg
    463.8 KB · Views: 1
  • Sierra 8.jpg
    Sierra 8.jpg
    180.5 KB · Views: 1
  • Sierra 7.jpg
    Sierra 7.jpg
    187.4 KB · Views: 1
  • Sierra 6.jpg
    Sierra 6.jpg
    214.7 KB · Views: 0
  • Sierra 5.jpg
    Sierra 5.jpg
    278.3 KB · Views: 0

Recent Posts

Top