223AI loads (75gr Amax and 65gr Gamekings)

ACLakey

Active Member
Joined
Feb 6, 2009
Messages
26
Location
So. Oregon
I finally have my 1:9 twist .223AI back together and am looking at working up some loads with 75gr Amax and 65gr Gamekings. I have the following powders on hand H335, Varget, H4895, TAC, RL15, RL17 I hear good things about RL15 and the 75gr Amax, just looking for a good starting point. Thanks.
 
H4895 was far and away the best powder in my gun. I ended up at 25.2 gr and about 3080 fps which is a pretty hot load in my gun. I would highly recommend a magnum primer to avoid piercing them. I use CCI450's. Varget and RL15 just didn't work that good for me.

Just my $0.02
 
Warning! This thread is more than 12 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.

Recent Posts

Top