-
If you are being asked to change your password, and unsure how to do it, follow these instructions. Click here
Scope rings
- Thread starter hammer111
- Start date
Help Support Long Range Hunting Forum
ShtrRdy
Well-Known Member
If the top of the receiver is straight/flat and the Area 419 rail/base is straight/flat then it's not to important to use one piece rings.
ntsqd
Well-Known Member
Straight and flat to what tolerances? Nothing it truly straight and nothing is truly flat, but at some point the deviations are too small to matter to the application.
hammer111
Well-Known Member
- Joined
- Dec 14, 2013
- Messages
- 496
Absolutely I'm not cheaping out on anything with this gun
Get some Burris Signature rings and you won't need a 20moa rail later.
Varmint Hunter
Well-Known Member
Get some Burris Signature rings and you won't need a 20moa rail later.
And .... the scope will be perfectly straight regardless of the receiver tolerances, the scope tube won't get bent and the rings will not pinch or mar the finish of the tube.
Burris Signature rings have been underrated for too long. I have a few sets on magnum rifles and they hold just as well as high dollar rings.
Just my 2 cents
Then you might as well jump straight to a Spuhr mount !
... But sit down first!For some folks, $150 is high dollar rings! Wasn't that long ago I was in that camp too
Varmint Hunter
Well-Known Member
For some folks, $150 is high dollar rings! Wasn't that long ago I was in that camp too
$150 for a set of rings is high dollar to me. I'd use them if it was necessary, but it's not.
You must not have bought any Signature rings lately
I just bought a set of 34mm High Rings and they were $149 shipped.
Varmint Hunter
Well-Known Member
You must not have bought any Signature rings lately
It sounds like you got taken for a ride. Here's the same set for $82.
Burris 34mm Signature Zee Weaver Rings Matte Black High
The revolutionary Signature design produces consistent accuracy, tremendous gripping power and stress-free mounting. These steel rings include a...
www.midwayusa.com
Last edited:
hammer111
Well-Known Member
- Joined
- Dec 14, 2013
- Messages
- 496
Oh I looked at them but I draw a line at ridiculously priced . When there's products just as good but reasonably priced.Then you might as well jump straight to a Spuhr mount !
I had a good laughNope , never tried those, I bought these:It sounds like you got taken for a ride. He's the same set for $82.
Burris 34mm Signature Zee Weaver Rings Matte Black High
The revolutionary Signature design produces consistent accuracy, tremendous gripping power and stress-free mounting. These steel rings include a...
Burris 34mm Xtreme Tactical Signature Picatinny-Style Rings Matte
The Burris Xtreme Tactical Signature Rings are designed with the tactical shooter in mind. While delivering ample holding power the Xtreme...
www.midwayusa.com
