Gunsmith to install banded front sight

letzhunt · Tuesday at 5:41 PM

I'm looking for a gunsmith who can properly attach a banded (likely NECG) front sight on a .458 win mag that's had the barrel cut to 20". Close is better but anywhere that does good work. I'm in NE Indiana. I can have the barrel removed and just send it for the sight install with the barrel marked at top dead center.

Brathany · Tuesday at 5:52 PM

Do you have the sight?

letzhunt · Tuesday at 7:26 PM

Not yet? My rifle is at my riflesmith to get the barrel cut. He does great work but doesn't install that kind of front sight. I was planning on having him just reinstall the original sight ramp but I really prefer the banded style.

Brathany · Tuesday at 7:30 PM

The concern is the outside diameter of where the barrel is cut and the internal diameter of the sight.

letzhunt · Tuesday at 9:11 PM

Understood. I measured at the 20" where it will be cut but can't find where I wrote that down.. And it's at the Rifle smiths so I Cant check to see the measurement. don't even know if I will be able to find one large enough in diameter.

Brathany · Tuesday at 9:23 PM

When it gets back, measure and then call the sight company to see if it's feasible. Really a non banded sight would be much easier to mount. No diameter concerns.

Sergeant Stadanko · Wednesday at 7:05 AM

JRH Advanced Gunsmithing in Carson City, NV. (Jack Huntington) He does that type of work all the time. Awesome gunsmith.

letzhunt · Wednesday at 8:32 AM

thanks for that lead.

Wilderness Blacktail · Wednesday at 10:27 AM

Ive read a number of chapters/articles where they state that you take some measurements in the vicinity you want the sight, buy the band, slide it up tight, mark it and cut the barrel to that length. Then reinstall the sight n sweat it on. Or something along those lines.
It seems like any decent smith could do it?

letzhunt · Wednesday at 11:24 AM

I have done my own barrel band swivels with 120 epoxy (what they use to attach nose cones to rockets!) Thought I would ask about a smith though since bluing will be necessary also. First obstacle is if there is a band to be had that is large enough or with the thickness to make it work.

Wilderness Blacktail · Wednesday at 11:47 AM

I got ya. Dont lots of those rifles come with barrel band sights? Seems as though there would hafta be a couple at least close. Made in europe perhaps?

Lenny Foffa · Wednesday at 6:59 PM

I would suggest Griffin. And Howe here in NJ. They have an excellent gunsmith building and they build their Dangerous Game riflesWith a band front sight !

Lenny Foffa · Wednesday at 8:33 PM

They could also attach a barrel band for your sling and an island rear sight ! All machined to match the taper of your barrel , then have the entire barrel and all the new hardware blued at the same time ! It will look perfect !

letzhunt · Wednesday at 9:02 PM

I installed a different rear sight and it already has a barrel band. I will look into them though. Thanks

Gunsmith to install banded front sight

letzhunt

Well-Known Member

Brathany

Well-Known Member

letzhunt

Well-Known Member

Brathany

Well-Known Member

letzhunt

Well-Known Member

Brathany

Well-Known Member

Sergeant Stadanko

Active Member

letzhunt

Well-Known Member

Wilderness Blacktail

Well-Known Member

letzhunt

Well-Known Member

Wilderness Blacktail

Well-Known Member

Lenny Foffa

Well-Known Member

Lenny Foffa

Well-Known Member

letzhunt

Well-Known Member

Similar threads

Recent Posts