This is my first experience with the micro chassis. It shoots fine now, pretty much .4-.5 in a 6.5cm Proof CF barrel in an Imapct action. Should I bed it?
-
If you are being asked to change your password, and unsure how to do it, follow these instructions. Click here
Manners LRH micro chassis need bedded?
- Thread starter tlsmith22
- Start date
Help Support Long Range Hunting Forum
This is a question that has crossed my mind too and I would love to hear the answer on.
That said, I also own one of these stocks, it remains as I got it new from Manners
That said, I also own one of these stocks, it remains as I got it new from Manners
Jakeweb09
Well-Known Member
I've shot a few different mini chassis/ chassis/ bedding blocks. I've personally felt every one of them could have benefitted from bedding. That being said all mine have been magnum cartridges. I have had good luck with xlr element on this particular subject but the largest was a 6.5 prc.
Manners Micro Chassis Pro Hunter and Long Range Hunters. Others also
Got several of the micro chassis Pro Hunter and Long Range Hunter stocks in from Manners. Pro Hunter weighs 28 oz Long Range Hunter weighs 34 oz. Have a pile of other ones also. Check out the website for more info. www.piercisionrifles.com
Read the last post on this thread. This is from a top smith
waspocrew
Well-Known Member
The whole point of the mini chassis is "bolt and go". I have 4 manners with the mini chassis - although not the micro chassis. All of them shoot very well. I see no reason to have them bedded.
I have tried 3 rifles by switching them into chassis' or a mini in LRH stocks. I really really saw so minimal difference like Ryan said most people could not tell the difference. Some i saw no difference. Hence most all my hunting rigs are some kind of chasis now and swap them out quite often.
Buzzsaw
Well-Known Member
Rifle builders HATE mini chassis. It costs them $400 for a bedding job. You buy a chassis when you don't want to bed.
Not sure what you're chasing but, you will have a chore trying to get under half inch groups. The accuracy you state, IF true, is fine for anything. If you want better accuracy, take the Proof off, install a truck axle steel barrel and bed it, you will then have an F-Class rifle.
Not sure what you're chasing but, you will have a chore trying to get under half inch groups. The accuracy you state, IF true, is fine for anything. If you want better accuracy, take the Proof off, install a truck axle steel barrel and bed it, you will then have an F-Class rifle.
Can't speak for the LRH, but I have used the Manners mini-chassis in two of the PRS stocks for a couple years now in several calibers - largest was 6 PRC. I don't know if they would benefit from bedding, but they all shot very well. I could see where larger calibers may benefit, but I still feel like the weak link of the "chain" - not the stock.
