I finally got my barrel this past Thursday, October 17th. I haven't put it together yet, catching up on hunting. Mine took 10 days short of 10 months to get.
Carbon Six Barrels Wait Time
- Thread starter 7mm man
- Start date
Help Support Long Range Hunting Forum
Quicksilver338
Well-Known Member
Ordered December 1, shows delivery tomorrow.
11 months but I've waited longer before for things. Start your builds in advance I say!
11 months but I've waited longer before for things. Start your builds in advance I say!
MBBCop
Member
Guess I will call Angel this week. No reply to last monday email I sent. Smh
Quicksilver338
Well-Known Member
I never inquired, and then mine showed up
maybe that's the secret
maybe that's the secretI ordered one back in early Dec of 2023 and was told 5 months. Well I still do not have it. Justin left and now Angel keeps sending me "updates" where she is completely lying to me in her responses. A month ago she said my barrel was in final stages and would ship later that week and yesterday she said they had a delay from their supplier and my barrel would be fast tracked once it arrived. I would never order from them ever again.
Last edited:
I had to call 4 times to finally get mine shipped.
I finally had time to work on my rifle today. I didn't really pay attention, but I was surprised they didn't stamp the caliber somewhere on the barrel or the maker's name. I attached the barrel to my Aero Solus action and torqued to proper settings 75-foot pounds +-5 pounds. I checked with the go gage, all good. I checked with the no-go gage, bolt closed just as easy. I'm definitely not dealing with Carbon6 again with their ridiculous turnaround time. Luckily Jarrett Rifles is only 20 minutes from my house. I took it to them and was told it probably needed to be milled a few thousands, but they would check it out. They're also going to engrave the caliber on the barrel for me and should be ready end of this week. This will be my last barrel from Carbon6.
Bill Nieters
Well-Known Member
- Joined
- Dec 8, 2015
- Messages
- 54
Pretty hard to dial in exactly where the engraving is supposed to go if they don't also have the action to know where things will end up once things are torqued
To me it doesn't matter, I want it for reference later if I take it off. Otherwise I have
To me it doesn't matter, I want it for reference later if I take it off. Otherwise I have to worry about tagging it. I could have 12 barrels in my shop at one time. It would be nice to have it marked. But don't get me wrong, tagging it isn't a big deal, just an inconvenience. X-Caliber engraes their prefit barrels.
Not to downplay your displeasure, but you do realize that just because the bolt closes on a no-go doesn't mean that it is out of spec, right?
The go gauge is minimum SAAMI length, a no-go is usually SAAMI minimum +0.006" (Manson, however some are +0.005"), and the field gauge is minimum +0.010". (https://mansonreamers.com/dimensions-and-tolerances-of-manson-headspace-gauges/)
Whose gauges are you using? You could very well have a chamber that is still in spec but 1 or 2 thousandths long from a "general practice" standpoint. It doesn't automatically mean you have excessive headspace, and depending on the chambering and if you plan to use Hornady ammo, having a bit more room in the chamber may be a good thing as I am seeing and reading a lot of people having pressure issues with Hornady ammo in tight chambers.
Just food for thought.
What brand of barrel blanks do they use for their Carbon 6 barrels?
Thanks
Thanks
g8ters
Well-Known Member
McGowen
Bill Nieters
Well-Known Member
- Joined
- Dec 8, 2015
- Messages
- 54
I just hope I get mine before they go out of business
