• If you are being asked to change your password, and unsure how to do it, follow these instructions. Click here

0 MOA vs 20 MOA

R

RugerHawg413

Well-Known Member
Joined
Feb 20, 2020
Messages
279
Location
Arkansas
Happy Friday!
I think I know the answer to this but I have a Savage 110 Ultralite in .30-06 that I am putting together. And I was wondering for that particular rifle and caliber, do you think that I should go with a 0 MOA or 20 MOA scope base? I will be hunting with it in NM, where there are shots taken around 400-500 yards and beyond, though my limit for right now is around 450-500 yards. Thank you for all info and wisdom, it is very much appreciated!
 
IMO there should be plenty of travel in the scope to accommodate a 500yd shot from an 06. I'm not sure why shooters put a 20moa rail on everything and anything. If, for some reason, you just want a little more elevation, there are 10 moa rails available. You can also get plenty of additional elevation by just using a set of Burris rings with the off-set inserts.
 
Either will work for you in reality.

I'm the type of guy that looks for a 40 , 50 , 60 moa base and still zero at 100 yards !
Just in case your buddy finds a spot where you can shoot steel out to 3000 yards plus !! 😎

Rum Man
 
RugerHawg413 said:
Understood. Yeah, I am putting a Vortex Razor LHT MOA FFP .45-22x50 on it. Sorry for not putting that on the first post. Thanks!!
Click to expand...

You should have plenty of travel within that scope (with a 0 MOA base) for the distance you plan to shoot. I guess I'm in the camp of 20 MOA base won't hurt and allows further travel if ever needed.
 
waspocrew said:
You should have plenty of travel within that scope (with a 0 MOA base) for the distance you plan to shoot. I guess I'm in the camp of 20 MOA base won't hurt and allows further travel if ever needed.
Click to expand...

Some rifle/scope combos won't even zero at 100yds if a 20moa base is used. Even if the combo worked, the reticle would be in an extreme position in the tube to compensate for that 20moa cant. 20moa rails are not beneficial for many uses.

Just my 2 cents.
 
Varmint Hunter said:
Some rifle/scope combos won't even zero at 100yds if a 20moa base is used. Even if the combo worked, the reticle would be in an extreme position in the tube to compensate for that 20moa cant. 20moa rails are not beneficial for many uses.

Just my 2 cents.
Click to expand...

I just looked over the rifles in my safe - all have 20 MOA rails and had no issues whatsoever with a 100 yard zero. My 22lr has a 30 MOA base and is zeroed at 50 yards.

I would wager most scopes designed for distance shooting (with exposed turrets such as the Vortex LHT the OP mentioned) have no issues achieving a 100 yard zero with a 20 MOA rail. At least that's been my experience.
 
I prefer to have a 20 moa, not that it's needed but I like to have my scope on the lower end of the total travel and it will usually keep the scope objective lens closer to the barrel (slightly). If you haven't picked a rail yet, check out the SRS rails....just picked up one for a savage and they are nice! They have both 0 and 20moa. Seems perfect for an ultra light.
 

Similar threads

bowhunthard88
Ballistics question? 20 MOA base vs. 0 MOA base
Replies
7
Views
65K
Autorotate
A
P
20 moa or 40 moa rail?
Replies
7
Views
8K
Petersen
P
C
+20 moa base
2
Replies
17
Views
4K
FearNoWind
FearNoWind
General RE LEE
Factory 0 MOA Rail Tikka CTR
Replies
7
Views
3K
General RE LEE
General RE LEE
E
Is the included waypoint 2020 scope base a 20 or 0 moa base?
Replies
1
Views
887
FEENIX
FEENIX

Recent Posts

Top