• If you are being asked to change your password, and unsure how to do it, follow these instructions. Click here

Desire to build a 300 RUM

Thanks for all the feedback, considering the math (Build Cost) I am researching the cost of a custom price. This was one of the recommendations
 
DURAMAX said:
A RUM built with a 9 twist along with an action and mag box capable of a 4 inch round is the way to get max performance out of this round. I load mine with a COAL of 3.99 and seat 245 Bergers about .020 off the lands on top of N570. with a 25 inch barrel it gives almost 3000 fps (2996). Great perfomance out to 1000 yards farthest I have shot it so far.
Click to expand...
^ this!! 9 twist 4" box. Buy lots of powder and let her eat!!
 
MagnumManiac said:
Absolutely zero negatives building on a trued REM 700, they are one of the best designs ever and why they are copied to the 'enth degree.
Done correctly, you will have a rifle that is just as good as any custom action.

Cheers.
Click to expand...
Except for low resale, no integrated bases, no integrated recoil lug and won't accept prefits and that's after dumping a pile of cash into one getting it trued, the primary extraction fixed, milled to accept longer mag boxes, the optic base holes straightend and opened up to 8/40. You do all that and a 700 is almost a custom action and the 700 only cost slightly more.
 
I used to shoot a RUM. It's a great round the only issue is making it mag feed with the heavy bullets.
I ended up going to 30 Sherman Mag for this reason.
 
I don't even bother having the action trued on a 700 anymore. For what it cost once done I could be at custom action with more features and prefits. I still use a ton of 700s and have great luck with them. I'd just run the 700 as a single shot and get it throated long.
 
Ckleeves said:
Except for low resale, no integrated bases, no integrated recoil lug and won't accept prefits and that's after dumping a pile of cash into one getting it trued, the primary extraction fixed, milled to accept longer mag boxes, the optic base holes straightend and opened up to 8/40. You do all that and a 700 is almost a custom action and the 700 only cost slightly more.
Click to expand...
Hey they accept Remage :p
 
My buddy did a build on a browning x-bolt. Proof barrel Boyd's stock in a 300rum. The action is great for the money and more gunsmiths will work on them than you think. He can load out to about 3.750 I think in the mag. Only downside is aftermarket support but with McMillan making stocks now Id build one in a heartbeat.
 
Ckleeves said:
Except for low resale, no integrated bases, no integrated recoil lug and won't accept prefits and that's after dumping a pile of cash into one getting it trued, the primary extraction fixed, milled to accept longer mag boxes, the optic base holes straightend and opened up to 8/40. You do all that and a 700 is almost a custom action and the 700 only cost slightly more.
Click to expand...
If that is your priority then don't use a $400 action and true it. Truing a REM 700 is pretty simple, I used to charge $250AUD for this service and $500AUD for chambering and barrel fitting to said action.
Mine cost me parts and time, and I could care less that they don't have integral bases, recoil lugs or bolts without primary extraction issues. All of mine have #8-40 base screw holes, first thing I do.
The parts I buy and use are all PT&G, complete one piece fluted bolt, .250" or .300" recoil lugs, Wyatt's bottom metal and Trigger Tech trigger now that Jewel are no more. Bases/rails are dependant on purpose.
Cost for me is a little less than a custom action by Borden or Bat, I am NOT in the US, so my costs are way more than yours in every way. Import fees, tax, customs agent fees and the import/export fees, the list goes on and on…

Cheers.
 
Ckleeves said:
Except for low resale, no integrated bases, no integrated recoil lug and won't accept prefits and that's after dumping a pile of cash into one getting it trued, the primary extraction fixed, milled to accept longer mag boxes, the optic base holes straightend and opened up to 8/40. You do all that and a 700 is almost a custom action and the 700 only cost slightly more.
Click to expand...
The bolt bushed, pin and spring updated, ejector/extractor and likely a new bolt handle. Not counting the side bolt release if you want it.
I know firsthand.
 
jbur13 said:
The 700 action works just fine as stated. By the time you true the action, cut it for a 4" box, and put in a PTG bolt, you are really close to the cost of a defiance classic that is ready to go. You can sell the factory 700 bolt and recoup some cash but in the end you still have a rem 700.
Go full custom :D
Click to expand...
That stand to reason. A good point!
 
I turned my Rem 700 300 RUM into a 7 LRM. It was always a good shooter, and I thought the recoil was quite mild for the cartridge, but I had an itch to build something different. I didn't do anything with the action, put on a McGowen remage barrel, and the rifle is a laser.
A buddy always gave me his brass from his 300 RUM, so I am well stocked for my 338 Edge.
That same buddy bought himself a 300 PRC for his 40th, and the RUM has sat ever since.
 

Similar threads

Sandstrom22
Carbon wrapped 300 rum build
Replies
2
Views
1K
jonthomps
J
T
wanting to build a 300 blackout
2
Replies
23
Views
6K
Kansaswoodguy
Kansaswoodguy
H
Building a 300 RUM From a Remington 700 long range rifle
Replies
4
Views
3K
Chopaka81
C
C
Looking to build a .308
Replies
4
Views
2K
James Kiser
J
W
looking to build a gun
2
Replies
17
Views
5K
3006savage
3

Recent Posts

Top