6 PRC help

Huntnful said:
@Barehandlineman11 has my reamer for lapua brass and 108/109 ELDM's. It has a .200 freebore and put a 108 ELDM at 2.955" .020 off the lands and a 109 ELDM at 2.980" .020 off the lands. I believe the 109 ELDM is just a 110 a tip with a plastic tip.

109 Hybrid may sit too far out FYI
Click to expand...
I didn't order yet from straight jacket and this reamer seems perfect. Thanks for the info!
 
Tidus56 said:
I decided to call straight jacket who has done most of my barrels and they have a 6PRC reamer so I got it sorted. Does anyone by chance know the bushing sizes they used to step the 6.5 PRC brass to 6mm?
Click to expand...
Using Lapua brass, best as I remember - I went with a .269" bushing. One step - but I did trash a couple pieces at the beginning.
 
I'd go to Unknown munitions as they have everything their to build an amazing 6UM. You need to call them and talk about their 6um. I I build a high performance 6mm it's going to be a 6um. From Unknown munitions

Best of luck
 
.271 bushing on Lapua brass. One step with a good lubed neck and a good chamfer prior to sizing.

Loaded OD neck diameter on lapua brass is .274
 

Similar threads

Nubba0681
Help... 300 prc suppressor
Replies
2
Views
3K
Rockin90
R
JustAnOldCooter
Carbon 6 Barrel - 300 PRC or 300 Wthby???
Replies
2
Views
383
adk hunter
adk hunter
Barbourcreek
6.5 prc / 300 prc / 7 prc barrel test
Replies
9
Views
4K
crashlanding
crashlanding
X
6.5 PRC Build
13 14 15
Replies
202
Views
66K
General RE LEE
General RE LEE
Turbo2160
Forming 6.5 prc from 300 prc
2 3 4
Replies
49
Views
5K
WildRose
WildRose

Recent Posts

Top