Alternative Options

wvbearhunter

wvbearhunter

Well-Known Member
Joined
Feb 10, 2023
Messages
640
Location
West Virginia
I am.a huge fan of 300 PRC and have a couple rifles chambered for it. A Zermatt and a Savage Elite. I have not fired the savage but am at around 500rds for the Zermatt. My problem is (I am a lefty btw) that I had shoulder surgery a few months ago and now find the magnum too unfortable to shoot. I am developing a flinch as a result. These are magnum receivers so my options are limited. What lower recoiling calibers are out there for these? Barrel swap for both are pretty easy. I have no issue with hot loaded 308 Win or even 45-70 recoil. I cannot really sell them locally as lefties are not in high demand.
 
wvbearhunter said:
I am.a huge fan of 300 PRC and have a couple rifles chambered for it. A Zermatt and a Savage Elite. I have not fired the savage but am at around 500rds for the Zermatt. My problem is (I am a lefty btw) that I had shoulder surgery a few months ago and now find the magnum too unfortable to shoot. I am developing a flinch as a result. These are magnum receivers so my options are limited. What lower recoiling calibers are out there for these? Barrel swap for both are pretty easy. I have no issue with hot loaded 308 Win or even 45-70 recoil. I cannot really sell them locally as lefties are not in high demand.
Click to expand...
Do you have a muzzle brake on them? I have a Zermatt with Proof and Terminator T3 brake in .300 PRC, 6.5 PRC and 7mm mag. All are very pleasant to shoot. If you already have a brake and it's to much then 6.5 PRC would be great option IMO.
 
Last edited:
Get them threaded for brakes.
I, too, had shoulder surgery on my right shoulder, rotator cuff repair and removal of the A/C joint (clavicle/shoulder blade joint) all I could shoot for 2 years were 22-250/22-250AI & 25-06, any more recoil than these was painful. Was up to speed on all of my magnums over the next 12 months, including 375H&H/Weatherby, 416 Rigby/450Rigby, 458 Lott, 404 Jeffrey etc…
Brakes will help…

Cheers.
 
Swap the bolt face as mentioned above and you could do a 25-06, 270, etc.

A good brake goes a long ways for helping recoil as well.
 
wvbearhunter said:
I was thinking 6.5 prc but I do not think it will work due to the action length. I have a PVA Jetblast on both
Click to expand...
What type of bottom metal are you using? Lots of people run a long action for the 6.5PRC. I don't have personal experience with that but have heard the biggest problem is just short stroking when ejecting fired rounds
 
wvbearhunter said:
I was thinking 6.5 prc but I do not think it will work due to the action length. I have a PVA Jetblast on both
Click to expand...
I, too, have a PVA Jetblash. They work, but there are better ones out there. Where the Jetblash was on, I ended up replacing it with one of Nathan's MBM 4-port Beast brakes, which is so much better.

 
Last edited:
wvbearhunter said:
I am.a huge fan of 300 PRC and have a couple rifles chambered for it. A Zermatt and a Savage Elite. I have not fired the savage but am at around 500rds for the Zermatt. My problem is (I am a lefty btw) that I had shoulder surgery a few months ago and now find the magnum too unfortable to shoot. I am developing a flinch as a result. These are magnum receivers so my options are limited. What lower recoiling calibers are out there for these? Barrel swap for both are pretty easy. I have no issue with hot loaded 308 Win or even 45-70 recoil. I cannot really sell them locally as lefties are not in high demand.
Click to expand...
Target shooting or hunting? If hunting, what wild game and how far?
 

Similar threads

D
Magneto Speed Alternate Mounting Options effectiveness.
Replies
7
Views
2K
Crews
C
cohunt
215 alternative ?
2
Replies
26
Views
2K
7.62 Gunner
7
BrentM
Alternative bullets 6.5
Replies
8
Views
2K
BrentM
BrentM
T
Aics alternative mags
Replies
3
Views
3K
cwinner
C
benchracer
Interesting RPR alternative for Tikka rifles...
Replies
3
Views
1K
7mmShooter
7

Recent Posts

Top