Yup. Use blc2 and wc846 for ar10 loads works ok.
-
If you are being asked to change your password, and unsure how to do it, follow these instructions. Click here
Favorite projectiles and powders for 308 win?
- Thread starter itsthemann
- Start date
Help Support Long Range Hunting Forum
Varget- Lapua- Berger are the standard go-tos. Almost anything 168 gr will shoot. CFE223 works very well in 308 and it's a bit cheaper and plentiful. Some of my favorite loads use CFE223. I don't care for H4895, never worked for me.
I save ALL the 308 brass I see, but only actually shoot Lapua. I had decent luck with Federal and Winchester brass. Lake City is really nice in some of the older lots, but Lapua is unmatched IMHO.
I save ALL the 308 brass I see, but only actually shoot Lapua. I had decent luck with Federal and Winchester brass. Lake City is really nice in some of the older lots, but Lapua is unmatched IMHO.
Swelch87
Member
I don't have a 308 but as far as 30 cal pills are concerned I love barnes 168 ttsx my 300 rum gac get them screaming with a hearty amount of rl 22.
Stevenstl86
Well-Known Member
Hunting: 16" and 22" 1:10 twist. Berger 168 and Varget in any brass.
Long range: 24" 1:11.25 twist. Lapua,Varget,175 smk. 2723fps. Good to 850yards until the wind beats you up
Long range: 24" 1:11.25 twist. Lapua,Varget,175 smk. 2723fps. Good to 850yards until the wind beats you up
DLJ6
Well-Known Member
I am working with TAC under a 130ttsx for deer. Back in the 90s I ran W748 under the 125 ballistic tip with good luck out of my 15"
Encore. I currently have a Savage 10T that I haven't been able to find a load for yet. If I can't get it to shoot I'll twist the barrel off and screw on a 6BRA or some 20cal.
Encore. I currently have a Savage 10T that I haven't been able to find a load for yet. If I can't get it to shoot I'll twist the barrel off and screw on a 6BRA or some 20cal.
Rick Richard
Well-Known Member
My all time favorite is IMR 4064 with 168 AMAX. It produced a five shot group at .195 for me.
Last edited:
How much benchmark and what brass? I've been pressuring out early with benchmark, but it sure is accurate
I bought 200 rounds of Petersen SRP 308 factory loaded with 168 RDF that shoot 1/2" 10 round group. My most accurate load is 43.2 grs IMR 4895, 168 TMK Lapua or sorted Winchester brass. I like Petersen brass as well which is one reason I bought their loaded ammo which was $30.00 a box at Graf's and had good brass afterward.
- Joined
- Aug 15, 2017
- Messages
- 1,291
46.4gr and work up to it. COAL 2.761 and using Lapua SRP brass. That's my deer rifle this season with a can. Edit; 12 twist barrel.
Last edited:
catch 22
Well-Known Member
Hornady 150gr SST over 43.5gr AR-Comp @ 2867fps and .5 moa, out of a Howa 1500 is my hunting load.
jeb405
Well-Known Member
I have only used Varget since getting my GAP custom Surgeon years ago. Not heard anything compelling to experiment with others. I do not hunt with it so my bullet experiments reflect that. Also when it was built 175 was as heavy as you commonly saw so it was built with intent to shoot 175 SMK. Many bullets shoot great it this gun. I believe if your gun won't shoot GMM 168 well it wont shoot anything well. Having said all that my go to for may years is the Berger 175 hunting VLD. When I first started shooting it there was no target and hunting bullets at Berger, but over time this bullet became called hunting. I load long, but to mag length. Never checked jump but with VLD profile I bet pretty long. I have experimented with 208's but not had very good results. I have chosen to shoot more and experiment less, too many bullets out there to try.
