300 SAUM Custom ADG Brass Group Buy?

Mike D Texas said:

Paul,

Is a phone call, text or email the best way to contact you on this?

Click to expand...

bigngreen said:

So is this the correct SAUM brass size or the Gunwerks small base size?

Click to expand...

Salmonhead said:

To my knowledge this is the standard saami sizing. We have had no discussion about a small base size that you mention.

Click to expand...

100percent said:

Sounds like the correct specs but, you might want to figure it out! Pretty clear Rich Sherman took a lick on a spec differential in his cases, which are based on saum. Let us know when you get an update!

Click to expand...

100percent said:

Sounds like the correct specs but, you might want to figure it out! Pretty clear Rich Sherman took a lick on a spec differential in his cases, which are based on saum. Let us know when you get an update!

Click to expand...

Idaho Trecker said:

What is the .200 dimension from the base? That will tell everything.

Click to expand...

Salmonhead said:

I had a chat with ADG today regarding the dimensions of the SAUM brass. All short or long action Ultra Mag brass has a SAAMI range from .5420-.5500 at the .200 mark on the case. ADG produces all of their Ultra Mag family of cartridges at .5450. Hope this clears up any questions.

Click to expand...

Idaho Trecker said:

Thank you for the information.

It is the same as the rest of their ultra mag lines (short and long) from what I measure also... within .001". On new adg 300 Sherman short and 300 rum I'm getting .546". With norma 300 saum and 300 rum I get .548-.549. All of these measurements are the .200" line for anyone wanting that information.

Click to expand...

Salmonhead said:

Confirmed, these are saami spec cases made to adg tolerances.

Click to expand...

Tac-O said:

Does that mean the cases available through the Sherman wildcat site are fatter or skinnier in dimensions than optimal?

Click to expand...