Timnterra
Well-Known Member
Financial problems dictate that I must sell some of my toys.
So Here goes.
Custom 300 win mag. Built on a Remington 700 action that has had every possible upgrade done to it. Action face trued, bolt lug abutments trued, threads trued, loading and ejection port opened up (looks just like a stiller action now) side bolt release added. As to the bolt: bolt face trued, bolt lugs trued, bolt spiral fluted, bolt threaded and tactical knob added. Barrel is a Krieger 1-10" twist 28.5" sendero contour with recessed crown and PTG .25" precision ground recoil lug. Stock is Manners MCST pillar bedded with bipod pic rail and left side flush cups. PTG stainless steel bottom metal. And Rifle Basix trigger. All metal is Cerakoted Graphite black. Rifle built by King Custom Arms. I've only fired the rifle 48 times for load development, a little practice and to shoot a deer at 318 yards. I stopped load development at Hornady brass, 212 led-x, 77 gr h1000, and Fed 215 primers, seated .060" off the lands, right about 3/8" group at 100 yds with 8fps extreme spread at average 2965fps. The pic of the target I uploaded has 1/2" grid for refrence. I took this load punched it into Hornady 4dof ballistic calculator and have rang steel out to 775yds. I'm asking $2,000 shipped for the rifle with picatinny rail but no optics.
So Here goes.
Custom 300 win mag. Built on a Remington 700 action that has had every possible upgrade done to it. Action face trued, bolt lug abutments trued, threads trued, loading and ejection port opened up (looks just like a stiller action now) side bolt release added. As to the bolt: bolt face trued, bolt lugs trued, bolt spiral fluted, bolt threaded and tactical knob added. Barrel is a Krieger 1-10" twist 28.5" sendero contour with recessed crown and PTG .25" precision ground recoil lug. Stock is Manners MCST pillar bedded with bipod pic rail and left side flush cups. PTG stainless steel bottom metal. And Rifle Basix trigger. All metal is Cerakoted Graphite black. Rifle built by King Custom Arms. I've only fired the rifle 48 times for load development, a little practice and to shoot a deer at 318 yards. I stopped load development at Hornady brass, 212 led-x, 77 gr h1000, and Fed 215 primers, seated .060" off the lands, right about 3/8" group at 100 yds with 8fps extreme spread at average 2965fps. The pic of the target I uploaded has 1/2" grid for refrence. I took this load punched it into Hornady 4dof ballistic calculator and have rang steel out to 775yds. I'm asking $2,000 shipped for the rifle with picatinny rail but no optics.
