WTB 6.5 prc dies

[coastrange]

Have a new Tikka inbound and need a set of dies. Looking for a FL sizer and thought I'd ask around. Thanks

 

[Kmccord]

Many ways to go, I would look at Eric Cortina FL Bushing sizer or Short Action Customs Modular bushing Sizer die. They are expensive, but they will be better at fine tuning your bump and neck size. The cheapest way would be a Lee FL sizer without the expander and a set of Mandrel's to set neck diameter.

 

[Get_Saum]

If you're looking for a more budget friendly set of dies you might consider this Forster full length bench rest die set. For the money they are great.

 

[Tim Sharp]

Have a new Tikka inbound and need a set of dies. Looking for a FL sizer and thought I'd ask around. Thanks

Hello Coastrange,

Since you have a little time, I might wait and try the new ADG Fat Boy dies coming this year. These are expensive, but they are 1 ¼" diameter dies and optimized for ADG brass. Obviously, a press which will accept the larger diameter dies will be needed.

ADG Fat Boy 1-1/4" Bushing Resizing Die - Atlasdg.com

ADG Premium 1-1/4″x12 Resizing Die. Specifically designed for tough, high quality ADG Cartridge Brass for Proper and Optimum full length sizing of the cartridge case – all the way down to its base. These dies come with three bushings, the ADG recommended nominal size and a +0.001″ and a...

atlasdg.com

 

[Salmonhead]

We are a redding dealer so if you choose redding, we can get them for you.

Paul
North American Ammunition Company
616 299 1349

 

[OG-danimal]

I have a spare Redding set I'd give you a deal on. PM me and I can send you pictures and more details

 

[Gary in MD]

If you're looking for a more budget friendly set of dies you might consider this Forster full length bench rest die set. For the money they are great. View attachment 637842

I agree and this is what I just ordered the other day for my rifle.

 

[Get_Saum]

I agree and this is what I just ordered the other day for my rifle.

200 yard targets here loaded with the Forster benchrest dies. Granted the rifle is well put together. As a personal preference I like the Forster ultra micrometer seater better than the Forster benchrest seater die but only for visual convenience. I also use a lot Redding type s and competition seating die sets. Some of my die sets are Redding type s full length sizing die and a Forster Ultra micrometer seater die. I've done this just as a cost savings.