WOW! Fury 50 cal 320gr Univeral Fit

[logan197]

This is a 3 shot group out of my Remington UML at 100 yrds. If my daughter wouldn't of been there to witness it I wouldn't of believed it. These flat out shot out of my UML.
Specs:
Remington UML
Arrowhead breech plug upgrade
Fed 215M primer
106 gr Blackhorn 209(weighed)
320 gr Fury 50 cal Universal Fit

 

[ENCORE]

This is a 3 shot group out of my Remington UML at 100 yrds. If my daughter wouldn't of been there to witness it I wouldn't of believed it. These flat out shot out of my UML.
Specs:
Remington UML
Arrowhead breech plug upgrade
Fed 215M primer
106 gr Blackhorn 209(weighed)
320 gr Fury 50 cal Universal Fit

EXCELLENT!

Glad you found them. Dennis really hit the nail on the head with that bullet. RUM owners are really happy.

 

[AZShooter]

Oh no not a better bullet! and I have a good load with the 50 cal 300 gr Thor Hammers! my rifle's group has bullets touching but not one ragged hole! Nice shooting!

 

[Remingtonelk]

This is a 3 shot group out of my Remington UML at 100 yrds. If my daughter wouldn't of been there to witness it I wouldn't of believed it. These flat out shot out of my UML.
Specs:
Remington UML
Arrowhead breech plug upgrade
Fed 215M primer
106 gr Blackhorn 209(weighed)
320 gr Fury 50 cal Universal Fit

Did you have to size them using a sizing die or did you feel like they fit fine?

 

[logan197]

No sizing required for the universal fit. One pop with the bullet starter and rest of the way with the rod.

 

[AZShooter]

I liked what Logan197 had to share. I switched to the 320 gr Fury universal bonded bullet in my 50 cal UML also with the arrowhead breech plug for the 2022 season. ( Fed 215 primers, 112 gr BH (weighed) 2196 fps)

I shot a NM cow elk at 225. Friend who was watching mistakenly said I missed as he saw the snow behind the cow flying up. It was a solid hit through lower shoulder exiting through ribs on off side. It staggered and dropped within 15 ft.

Also used it for a coues wt MZ hunt in Az. The buck stopped broadside at 200 yds. I aimed just behind the shoulders. It turned around to show us a very easy to see large exit hole surrounded with blood seen with the naked eye. We both exclaimed: " he's dead"!

My experimenting with other bullets is over. Very happy with the accuracy and lethality of this Fury bullet.

 

[Muddyboots]

Dennis had made custom bullets for me and have shot lights out. Very under rated bullet guy!

 

[cohunt]

I'm hearing good things with these bullets from the UML rifles--- BUT i hear lots of guys saying they see tumbling when used in std inline ml's until you get around 110-115 gr of bh209 (volume) --- so if you like to push a bullet hard then these might work for you-- if you want to stay under 110 gr of bh209 or are using any other powder, these might not work for the std inline ml guys

I do see that hornady jas come out with a new 'bore driver' line of 290 ftx and 340 eldx bullets--- these have the plastic base ( not tight bore fit like the original ftx line)-- I'd like to see results of these 2 bullets if anyone has shot them .

I have a optima v2, it shoots the old ftx very well, the Thor 300 pretty good, but the 270 bore lok are about 3/4 moa for me (all 3 of these I use 100-110 gr volume of bh209)

I pulled a ml cow tag this year so I'll be practicing more than normal and would be intetested in trying the new bore driver line if available

 

[KJW]

That's some awesome shooting! This all gets me excited as the mail just showed up with fury's and the arrowhead breech plug for my paramount. If I end up even close to that I'll be happy

 

[dmm08300]

Impressive!