Which cheek rest for bergara b-14 ridge

[GregBFL]

I recently purchased my Bergara B-14 Ridge and after I installed the Vortex Viper HS-T 4-14x44 scope, 20 MOA scope rail and Burris XTR Signature rings (Low), I find the height of the stock riser is just a little too low. I have performed a "Search" of the forum and after reading numerous posts I have narrowed it down to these and would appreciate any input that con be offered. I am trying to avoid the ones that have (2) bolts that drill horizontally through the stock (i.e. Karsten's, Matthew's, etc.) but they are not off the table. I have no affiliation with any of these manufacturers...

1) Accu-Riser Ambi Comb Raiser CR-6000 - I like this design because it is similar to the Victor Cheek Riser I have on my Victor Titan 1022 stock in that it can be screwed on with (2) small screws from the top. It is supposed to be tapered for a typical Rem 700 stock and it has a clean look to it. Downside is it only has (2) adjustments (1/2" and 1") and I can't really find reviews on it via the forums. Cost is only $38 which is definitely one of the least expensive options.

2) Bradley Adjustable Cheek Rest - I like the fact that it's kydex based and allows for height / angle adjustments and seems to have favorable reviews. Downside to it is the cost, I don't want to sound cheap, but it will run in the neighborhood of $130 with shipping. If it's worth it I have no problem paying that.

3) Tac Pro Strap-On Cheek Rest - Similar in design to the Bradley and to me, it looks a little cleaner. According to the website it's .125" kydex so it should be plenty strong. Is rubberized between the kydex and the stock and is supposed to fit tightly to a variety of stock. Downside to it is I haven't seen many reviews on it and like the Bradley, it's pricey. It will be around $30 less than the Bradley.

4) Triad Modular Stock Pack - I'm not sure I want to go with a Cordura based soft stock pack but of those, this one seems to get the best reviews and recommendations. I like the idea of having a little extra storage but I am concerned about how well it will perform as consistent cheek weld with regards to respectability. Cost is around $50 which is reasonable for the quality I have been reading about.

Thanks for taking the time to read through all this and by all means, give me your thoughts.

 

[Mrjamiev]

So, I'm looking for the same answer you were. What did you need up choosing?

 

[AZShooter]

Wondering about the current rings. Why not get some that are lower?

Another approach would be to get rid of rail and go for a ring base configuration that puts that scope lower. Then see if you need to add some height to the stock.

 

[Tiny Tim]

Not sure how much rise you require, but agree with AZShooter, a different ring/base/rail system may be a better option. Of those listed, I have no experience with the CR6000, I have used the others. I prefer the Triad Tactical stock pack only because of price and the warmth in the winter (I hunt in sub zero weather a lot). Between the Tac-ops and Bradly Creek, my vote is for the Bradley Creek. I like the drilled holes in the cheek piece rather than the slots. Its more robust and simply a personal choice. I don't believe you will be disappointed by any of them. Let us know what you decide.

 

[rharfo]

Triad, I have several. Excellent quality. They come with several Velcro strips to raise height.