• If you are being asked to change your password, and unsure how to do it, follow these instructions. Click here

What is the the most flat shooting cartridge yall can think of?

Use the 75gr Hammer HHT on everything up to elk and don't worry about a 2 bullet solution.
We just took delivery today of a custom 220 Swift ai. Will be interesting to see what it can do. Plan with this rifle was to run our heavier Hammer HHT's. I think it will be impressive with the 57gr Hammer HHT. Hoping 4000 fps. Might be optimistic.
If just holding hair on coyotes, I think the .224 Clark or TTH deserves a mention. I haven't run charts, but it's where I might start. 50-55 grains 4300 fps, and 75-80 3700 fps.
 
Nonetheless, people load them, and they are offered as loaded ammo.
View attachment 568464

Yes! No, I am not worried about short barrel life. I have other chamberings with excellent barrel life.
Yeah I knew they came in loaded ammo. 147 would be where I stop in a creedmoor case. But I also don't own a creedmoor so I'll never need to make that decision.

I just saw that your 257wby is 22". How much velocity do you think you are losing per inch vs a 26" barrel? I would think it's close to 50fps per inch especially with the heavies. A 257wby with a case full of N570 or even RL33 pushing a 140gr down a 26" barrel would be at 3200fps on cruise control.......I would think.
 
Yeah I knew they came in loaded ammo. 147 would be where I stop in a creedmoor case. But I also don't own a creedmoor so I'll never need to make that decision.

I just saw that your 257wby is 22". How much velocity do you think you are losing per inch vs a 26" barrel? I would think it's close to 50fps per inch especially with the heavies. A 257wby with a case full of N570 or even RL33 pushing a 140gr down a 26" barrel would be at 3200fps on cruise control.......I would think.
It cost me $20 for my 6.5 CM, https://www.longrangehunting.com/threads/i-got-my-first-6-5-cm-for-20.201958/

My best WAG is ~25 FPS per inch, so ~100 FPS compared to a 26" barrel. It was built to hunt suppressed.
.257 WBY scoped and suppressed.jpg
 
It cost me $20 for my 6.5 CM, https://www.longrangehunting.com/threads/i-got-my-first-6-5-cm-for-20.201958/

My best WAG is ~25 FPS per inch, so ~100 FPS compared to a 26" barrel. It was built to hunt suppressed.
View attachment 568470
Good looking gun! Maybe someone will chime in with a full size one with a fast twist and give some velocity numbers. I'd guess that a 26" 25-06AI or 25sherman with some retumbo would push a 140gr 3100fps.

Not knocking what you got btw
 
Good looking gun! Maybe someone will chime in with a full size one with a fast twist and give some velocity numbers. I'd guess that a 26" 25-06AI or 25sherman with some retumbo would push a 140gr 3100fps.

Not knocking what you got btw
I can push the 145 BH to 3100 FPS with MagPro as a test powder (67.5 MagPro .015" off the lands, 3090 FPS 5 shot average) out of a 22 " barrel. See #122 of https://www.longrangehunting.com/threads/new-old-25-cal-wildcat.324314/page-9#post-2908094. His .257 WBY has a 26" barrel and is pushing it at 3200 FPS. So, the 100 FPS difference in velocity I provided in #270 is spot on.
 
Yeah I knew they came in loaded ammo. 147 would be where I stop in a creedmoor case. But I also don't own a creedmoor so I'll never need to make that decision.

I just saw that your 257wby is 22". How much velocity do you think you are losing per inch vs a 26" barrel? I would think it's close to 50fps per inch especially with the heavies. A 257wby with a case full of N570 or even RL33 pushing a 140gr down a 26" barrel would be at 3200fps on cruise control.......I would think.
I'm getting 3280fps with my 257-7 blaser (Blackbird) with a 26" barrel and 145gr blackhole.
 
MPBR of 250 yards and I'm sure it's good enough for deer out to 800 yards. I've taken a badger with a coldbore shot at 659 yards and it hit hard. Cheap Barnes 145gr Match Burners.
 
Top