Marky_mark
Well-Known Member
Gary at bighorn has some stuff for me too so if you need anything, let me know and I can get it shipped out together.
Thanks Mark, appreciate that, I don't have anything I ordered at Bighorn thanks. Also appreciate the offer of being able to try some other brakes. You have always been a really good guy and you just proved it one more time. Happy New Year.Gary at bighorn has some stuff for me too so if you need anything, let me know and I can get it shipped out together.
I have a bunch of different bullets too if your having a hard time finding someThanks Mark, appreciate that, I don't have anything I ordered at Bighorn thanks. Also appreciate the offer of being able to try some other brakes. You have always been a really good guy and you just proved it one more time. Happy New Year.
Lancekenyon - I will take refrain from commenting on your post. Happy New Year to you too.
Thanks but I have quite an assortment of 338 bullets from my other ones. Everything from 160 to 270, and pretty much everything in between. Going to stick to 225 and below, actually hoping to get a real sweet shooting load in the 160 or 185 TTSX or Hornady CX monos. My 20" NULA 308 will spit out Hornady Interbond 150 grain bullets at 3100 fps and lays a big smack down on moose, elk and bear. The 257 Weatherby Ultra Light has a 26" barrel and spits out the 117 Hornady BTSP at 3450 fps and is also very effective on large game. This one spitting our a 185 at 3200 fps should be a great round in a really light, short and handy rifle.I have a bunch of different bullets too if your having a hard time finding some
I bought a bunch for my 338 ss
Bashaw has some 225 ceb maximus in stock too
Young guy at range had one in 300 Weatherby Mag. It looks like big brother to mine which is 280AI. He was getting larger groups so he asked me to shoot his. I got scoped on the first shot. I did put a nice 3-shot group though. I just surprised me on the first shot as it was a lot more recoil than 280AI. He had the Accubrake on it.Interested to know if anyone is shooting one of these 5 LB guns in any of the hotter cartridges like 300 Weatherby, 338 RPM etc. With the new recoil pad and brake I would think they are fairly manageable. My question is more about what they are like when you put the thread protector on instead and shoot them that way. The 338 RPM with the 18" barrel puts up some pretty stout recoil numbers even just using 200 grain bullets at 2800 fps. Makes 37 ft lbs of recoil, assuming a hunting weight of 6.3 Lbs with scope and sling. and a recoil velocity of almost 20 FPS.
Those should be a hard hitting combination. Be sure to post up how load development goes. Hoping to have my 338 RPM chambered by early spring. I amThanks but I have quite an assortment of 338 bullets from my other ones. Everything from 160 to 270, and pretty much everything in between. Going to stick to 225 and below, actually hoping to get a real sweet shooting load in the 160 or 185 TTSX or Hornady CX monos. My 20" NULA 308 will spit out Hornady Interbond 150 grain bullets at 3100 fps and lays a big smack down on moose, elk and bear. The 257 Weatherby Ultra Light has a 26" barrel and spits out the 117 Hornady BTSP at 3450 fps and is also very effective on large game. This one spitting our a 185 at 3200 fps should be a great round in a really light, short and handy rifle.
I understand chambering and throating for a specific bullet but personally I would never do that in a hunting rifle. Target gun, sure but in my mind it is far too limiting in a gun that can hunt everything from Coyote to the biggest bears and bison.Those should be a hard hitting combination. Be sure to post up how load development goes. Hoping to have my 338 RPM chambered by early spring. I am
Still trying to decide on a bullet for it.
I agree with that. The only gun I chambered for a specific bullet was my 300 Win Mag and a 215 Berger. I actually just switched it over to the 168 HHT. Way too much meat loss/bloodshot with the Berger. I do have some 190 HHT to try in the 338 RPM. But I wasn't completely satisfied with the 210 HHT out of my 338 RUM on this years elk. So I'm kinda hesitant to try the 190 HHT. Might end up selling them.I understand chambering and throating for a specific bullet but personally I would never do that in a hunting rifle. Target gun, sure but in my mind it is far too limiting in a gun that can hunt everything from Coyote to the biggest bears and bison.