Vortex Viper HSLR zero issues with elevation knob

[Sika Hunter]

20MOA in a rail Could also switch to burris signature series zee rings and new mounts (if you want to stay with 2-piece mount) and get 2x 20moa eccentrics. Set them up in opposition to each other to get 40MOA total returned to you. That'll drop the elevation turret to the #1 baseline giving you something near 50MOA of up left. That should be enough to get you near or beyond the supersonic limit. A 20MOA rail and 20MOA in the rings will have the same effect but a 1-piece rail does make it a lot tighter getting fingers into the loading port. I personally prefer the Burris Signature Series rings as the eccentrics in them are polymer and help prevent damage to the scope finish, no lapping required.

I have a Vortex scope with a 20moa rail and zee rings. This gave me aprox 27moa.
With this i have shot out to 1000m (on paper).

 

[kvw4x4]

I have a Vortex scope with a 20moa rail and zee rings. This gave me aprox 27moa.
With this i have shot out to 1000m (on paper).

Any pictures of your setup? You can text them to 3608153198 if it's easier thanks

 

[Sika Hunter]

Any pictures of your setup? You can text them to 3608153198 if it's easier thanks

Sorry I have been out of town.
Here are some pics of my settup.

This is a 20 MOA rail and as much offset (0.010") as I could get.
This workedout to be about 27 MOA in all.

 

[Bcwn]

Vortex will recommend 20 MOA rings

 

[kvw4x4]

How about these? Seems exactly like what I got but 20 moa. https://www.midwayusa.com/product/1781381814

Is a weatherby vanguard short or long action? And is the weatherby vanguard stock the same as the rem 700. Thanks