Weight. 22oz isn't crazy for a 338 can, but it's quite a bit heavier than the norm across all calibers. It's likely going to have a bigger impact than a TBAC, Omega, or other more common silencer.
-
If you are being asked to change your password, and unsure how to do it, follow these instructions. Click here
Very poor accuracy with my new suppressor.
- Thread starter bitbythebug
- Start date
Help Support Long Range Hunting Forum
But those cans won't work on a 338RUM, so they aren't relevant. I've been a suppressor owner for 15 years so the Harvester is quite common to what I am use to, but I guess compared to the lightest and smallest cans on the market it is kinda big. The KGM R30 I just picked up is short, fat, and lighter than some in my collection. I've got 12-15 cans, so a pretty broad range of weight and size.
OP has yet to reply to any of this.
No where has OP said they were using 338RUM, or any 338 for that matter. They only said they're seeing big POI shifts on evey gun they've tried.
Even if they were using it on a 338, the weight comparison is still relevant as other users chime in with their experience. So far we've seen people chiming in with their experiences running 8-14oz cans.
The Harvester is heavy compared to many popular cans. An Ultra 9 is about 11oz, and an Ultra 7 is about 8. An Omega is around 15. You can't throw a 22oz can on a rifle and expect it to behave the same as an 11oz can.
Owning multiple cans, in multiple configurations, I can attest to the fact that weight doesn't seem to create more or less POI shift. There is no rhyme or reason to the shift, and more weight does not equal more shift. Every barrel is different, and a can that throws a 2" shift in both directions on one rifle throws 4" up and 3" right on another barrel. Both Bartlein M24 contour barrels 26" in length. I have a #4 barrel that shifts 2" down and 1" right with the can that is dedicated to that rifle. So weight really isn't relevant. Even light cans can have large POI shifts.
I love mine!
sea2summit
Well-Known Member
Actually that is accuracy, I think you're asking about precision. But I agree, POI is gonna shift anytime you do anything to the barrel.
bayou shooter
Active Member
- Joined
- May 14, 2015
- Messages
- 31
Anytime you put something on the barrel it is going to affect the POI. Re zero and try again.
bayou shooter
Active Member
- Joined
- May 14, 2015
- Messages
- 31
Anytime you put something on the barrel it is going to affect the POI. Re zero and try again.
bitbythebug
Well-Known Member
- Joined
- May 5, 2015
- Messages
- 121
Thanks to all. I will re-zero and go from there.
ShootnMathews
Well-Known Member
I'm glad to hear this from both of you. I have one (omega 300) in jail right now. Probably be march before I get it. I can't wait
Same here. The Omega 300 on 2 Christensen rifles (223 AR & 6.5 CM Ridgeline) has not required any re-zeroing. I'm guessing that's not the norm. And if anything, group size has shrunk for both. Just got a Nomad Ti & CGS Hyperion out of jail. Hope to have on hand shortly for some "sea trials".
EM_556
Well-Known Member
I have experienced this as well. It is different on every rifle and caliber.
