Hey everyone!
I'm selling my lightly used suppressors. Some are new/unfired, will be noted below.
All of these are great performers, simply no longer needed/wanted.
I'm in Daytona Beach, FL.
NOTES:
- If you haven't gone through the NFA process, it's easy (for me at least
), just time consuming.
As long as you can pass a background check, your ATF Form4 will be approved.
- All of these are on Form4's, and will transfer as such.
- I have owned A LOT of NFA items over the last 9 years once I turned 21.
As of the last 4 years, my personal Form4 wait times have been no longer than 5 months... and the ones I've sold in the last couple years have been 4-9 months to fellow FL residents/friends.
- If you don't have a Trust set up, and we meet up (you being a FL resident), I would suggest you submit as an individual (notable faster wait times I've seen over the years with various people).
- ATF eForm4's don't apply to me, since the transferor has to be an FFL.
- If you're out of state, your FFL/SOT will need to submit an initial Form4 (additional $200) to have the suppressor(s) transfer from myself to them ..... THIS IS NOT A FORM3, I've had multiple FFL/SOT's who don't know what they're talking about, insist I submit a Form3 (that is only between FFL/SOTs, including Dealers & Manufacturers).
- Either if you're a FL resident, or not, when purchasing one of these, we will swap phone numbers, so I can keep you updated on the process, give instructions, and answer questions.
If you're a Florida Resident:
- I will gather basic information from you, to pre-fill the majority of the Form4 sections, Firearm Bill of Sales copies, etc.
- Depending if you submit as a Trust or an Individual, you'll need to obtain the needed quantity of Finger Print Cards and Passport photos (can easily be taken at your local Sheriff's/PD Office) prior to the 1st Meet Up.
- 1st Meet Up: exchange $$, you finish signing the Form4's, I will provide a filled out USPS Priority Flat Rate Envelope for you to mail off at your local Post Office.
- Your check will be cashed within a week of it arriving at the ATF location, or Credit Card can be filled out in the Form4 instead.
- About 2 months after your payment is processed, I would suggest you call the ATF once a month on the serial number(s), to know ahead of time for approval.
- We Wait........
- As the transferor, I will receive the approved Form4(s) in the mail, I will text you immediately to arrange the 2nd Meet Up.
- 2nd Meet Up: you take possession of your suppressor(s) and Form4(s)... have fun shooting!
If you're NOT a Florida Resident:
- If one of these suppressors really tickles your fancy, you can purchase one to start the below additional process.
- After payment is sent to me, you will need your preferred in-your-state FFL/SOT to send me their info (not just their FFL info, their Special Occupational Tax as well)
- I will fill out and sign with Live Ink (a pen) the Form4's and mail them to your FFL/SOT
- Your FFL/SOT, being the transferee, will need to sign their sections with Live Ink (a pen) ... I will have highlighter tabs on the sections ... and they will need to include payment for the initial $200 transfer.
- Your FFL/SOT will then mail the finished Form4's to the ATF location.
- As the transferor, I will receive the approved Form4(s) in the mail.
- I will ship the suppressor(s) and approved Form4(s) to your FFL/SOT.
- You will then need to submit your own Form4(s) with your FFL/SOT ... I am out of the picture at that point.
Don't hesitate to shoot me a PM / ask a question!
Thunder Beast 338 Ultra FDE ..... $1500
- The Best of the Best!
- .338 Bore
- All titanium body, and a heat treated/IonBond Coated stainless steel muzzle brake (shims included).
- Includes an Armageddon Gear mirage cover
- The 3/4x24 Muzzle Brake is new/unfired, mounted in the suppressor with 2 small drops of Red Loctite, can be removed with some Rocksett & heat.
- The suppressor only has about 100rounds of 338 Lapua Magnum through it... fired with a different muzzle brake.
AAC Titan TI ..... $1000
- .338 Bore
- Excellent performer, nearly as quiet as the ThunderBeast 338, just slightly heavier, and shorter.
- All Titanium construction.
- The same baffle monocore as the AAC Titan-QD used in the military.
- Direct thread 3/4x24
- The suppressor only has about 100 rounds of 300 WinMag and 100 rounds of 300 BLK through it.
AAC Prodigy ..... $200
- One of the best 22LR suppressors for a rifle, still great on a 22LR handgun.
- Lightweight aluminum construction (stainless steel muzzle threads)
- Easy disassembly, tools included.
- The suppressor only has about 400 rounds of 22LR through it, kept very clean.
AAC SPR/M4 ..... $750
- 5.56 bore
- Sadly discontinued, one of AAC's quietest metered cans, and having lower back pressure with it's reflex (over the barrel) design.
- Great for clone builds.
- All Inconel construction (high durability).
- Indexable mount to minimize POI shift.
- Includes 1/2x28 FlashHider mount (no shims needed).
- The suppressor only has about 500 rounds of m855 through it.
SilencerCo Hybrid ..... $550
- .46 bore
- Great versatile/adaptable can... not the best at one thing, unless suppressing a 45-70
- Includes 5/8x24 Direct Thread mount, flat cap, anchor brake, manual and tools.
- Brownells Alumi-Hyde Dark Earth coated
- The suppressor only has about 200 rounds of 45ACP through it.
SAS Sentinel ..... $550
- 5.56 bore
- Suppressed Armament Systems is an underrated company... rivals Thunder Beast Arms Corp
- All Titanium construction.
- Direct thread 1/2x28
- Includes an Armageddon Gear mirage cover
- The suppressor only has about 400 rounds of FGMM 223 through it.
Thunder Beast Ultra 7 ..... $750
- .30 bore
- All Titanium construction.
- Direct thread 5/8x24
- The suppressor only has about 200 rounds of FGMM 308 and 250 rounds of 300 BLK through it.
Thunder Beast Ultra 9 ..... $800
- .30 bore
- Includes an Armageddon Gear mirage cover
- All Titanium construction.
- Direct thread 5/8x24
- The suppressor only has about 400 rounds of FGMM 308 through it.
Thunder Beast Ultra 223P-2 ..... $650
- 5.56 bore
- Direct thread 1/2x28
- Includes an Armageddon Gear mirage cover
- The suppressor only has about 500 rounds of FGMM 223 through it.
Thunder Beast 556 TD ..... $350
- Great durable can, designed for the Military SUR-G contract.
- Larger bore than most 5.56 cans, for less back pressure
- Direct thread 1/2x28, can be pinned/welded to make a short barrel above 16"
- Can be disassembled for maintenance, not really needed for full power ammo.
- Never used/fired/mounted
OSS Helix Magnum ..... $550
- .338 bore
- Excellent can for AR10's.
- No back pressure/flow through design.
- Can be disassembled for maintenance, not really needed for full power ammo.
- Includes 5/8x24 FlashHider mount (no shims need)
- The suppressor only has about 100 rounds of 30-06 and 200 rounds of 308 through it.
Griffin Armament Recce 5 Mod4 ..... $400
- 5.56 bore
- Tough as nails stainless steel suppressor for 5.56 AR's
- Includes 1/2x28 muzzle brake mount (inside suppressor) & shims. Also the Griffin "Gucci Range Bag" & manual.
- The suppressor only has about 400 rounds of m855 through it.
*** NOTE: LRH won't let you edit a post after 2 weeks..... when any of these sell after 2 weeks from the Original Posting Date, I will repost a new one to reflect those updates. ***
I'm selling my lightly used suppressors. Some are new/unfired, will be noted below.
All of these are great performers, simply no longer needed/wanted.
I'm in Daytona Beach, FL.
NOTES:
- If you haven't gone through the NFA process, it's easy (for me at least
), just time consuming. As long as you can pass a background check, your ATF Form4 will be approved.
- All of these are on Form4's, and will transfer as such.
- I have owned A LOT of NFA items over the last 9 years once I turned 21.
As of the last 4 years, my personal Form4 wait times have been no longer than 5 months... and the ones I've sold in the last couple years have been 4-9 months to fellow FL residents/friends.
- If you don't have a Trust set up, and we meet up (you being a FL resident), I would suggest you submit as an individual (notable faster wait times I've seen over the years with various people).
- ATF eForm4's don't apply to me, since the transferor has to be an FFL.
- If you're out of state, your FFL/SOT will need to submit an initial Form4 (additional $200) to have the suppressor(s) transfer from myself to them ..... THIS IS NOT A FORM3, I've had multiple FFL/SOT's who don't know what they're talking about, insist I submit a Form3 (that is only between FFL/SOTs, including Dealers & Manufacturers).
- Either if you're a FL resident, or not, when purchasing one of these, we will swap phone numbers, so I can keep you updated on the process, give instructions, and answer questions.
If you're a Florida Resident:
- I will gather basic information from you, to pre-fill the majority of the Form4 sections, Firearm Bill of Sales copies, etc.
- Depending if you submit as a Trust or an Individual, you'll need to obtain the needed quantity of Finger Print Cards and Passport photos (can easily be taken at your local Sheriff's/PD Office) prior to the 1st Meet Up.
- 1st Meet Up: exchange $$, you finish signing the Form4's, I will provide a filled out USPS Priority Flat Rate Envelope for you to mail off at your local Post Office.
- Your check will be cashed within a week of it arriving at the ATF location, or Credit Card can be filled out in the Form4 instead.
- About 2 months after your payment is processed, I would suggest you call the ATF once a month on the serial number(s), to know ahead of time for approval.
- We Wait........
- As the transferor, I will receive the approved Form4(s) in the mail, I will text you immediately to arrange the 2nd Meet Up.
- 2nd Meet Up: you take possession of your suppressor(s) and Form4(s)... have fun shooting!
If you're NOT a Florida Resident:
- If one of these suppressors really tickles your fancy, you can purchase one to start the below additional process.
- After payment is sent to me, you will need your preferred in-your-state FFL/SOT to send me their info (not just their FFL info, their Special Occupational Tax as well)
- I will fill out and sign with Live Ink (a pen) the Form4's and mail them to your FFL/SOT
- Your FFL/SOT, being the transferee, will need to sign their sections with Live Ink (a pen) ... I will have highlighter tabs on the sections ... and they will need to include payment for the initial $200 transfer.
- Your FFL/SOT will then mail the finished Form4's to the ATF location.
- As the transferor, I will receive the approved Form4(s) in the mail.
- I will ship the suppressor(s) and approved Form4(s) to your FFL/SOT.
- You will then need to submit your own Form4(s) with your FFL/SOT ... I am out of the picture at that point.
Don't hesitate to shoot me a PM / ask a question!
Thunder Beast 338 Ultra FDE ..... $1500
- The Best of the Best!
- .338 Bore
- All titanium body, and a heat treated/IonBond Coated stainless steel muzzle brake (shims included).
- Includes an Armageddon Gear mirage cover
- The 3/4x24 Muzzle Brake is new/unfired, mounted in the suppressor with 2 small drops of Red Loctite, can be removed with some Rocksett & heat.
- The suppressor only has about 100rounds of 338 Lapua Magnum through it... fired with a different muzzle brake.
AAC Titan TI ..... $1000
- .338 Bore
- Excellent performer, nearly as quiet as the ThunderBeast 338, just slightly heavier, and shorter.
- All Titanium construction.
- The same baffle monocore as the AAC Titan-QD used in the military.
- Direct thread 3/4x24
- The suppressor only has about 100 rounds of 300 WinMag and 100 rounds of 300 BLK through it.
AAC Prodigy ..... $200
- One of the best 22LR suppressors for a rifle, still great on a 22LR handgun.
- Lightweight aluminum construction (stainless steel muzzle threads)
- Easy disassembly, tools included.
- The suppressor only has about 400 rounds of 22LR through it, kept very clean.
AAC SPR/M4 ..... $750
- 5.56 bore
- Sadly discontinued, one of AAC's quietest metered cans, and having lower back pressure with it's reflex (over the barrel) design.
- Great for clone builds.
- All Inconel construction (high durability).
- Indexable mount to minimize POI shift.
- Includes 1/2x28 FlashHider mount (no shims needed).
- The suppressor only has about 500 rounds of m855 through it.
SilencerCo Hybrid ..... $550
- .46 bore
- Great versatile/adaptable can... not the best at one thing, unless suppressing a 45-70
- Includes 5/8x24 Direct Thread mount, flat cap, anchor brake, manual and tools.
- Brownells Alumi-Hyde Dark Earth coated
- The suppressor only has about 200 rounds of 45ACP through it.
SAS Sentinel ..... $550
- 5.56 bore
- Suppressed Armament Systems is an underrated company... rivals Thunder Beast Arms Corp
- All Titanium construction.
- Direct thread 1/2x28
- Includes an Armageddon Gear mirage cover
- The suppressor only has about 400 rounds of FGMM 223 through it.
Thunder Beast Ultra 7 ..... $750
- .30 bore
- All Titanium construction.
- Direct thread 5/8x24
- The suppressor only has about 200 rounds of FGMM 308 and 250 rounds of 300 BLK through it.
Thunder Beast Ultra 9 ..... $800
- .30 bore
- Includes an Armageddon Gear mirage cover
- All Titanium construction.
- Direct thread 5/8x24
- The suppressor only has about 400 rounds of FGMM 308 through it.
Thunder Beast Ultra 223P-2 ..... $650
- 5.56 bore
- Direct thread 1/2x28
- Includes an Armageddon Gear mirage cover
- The suppressor only has about 500 rounds of FGMM 223 through it.
Thunder Beast 556 TD ..... $350
- Great durable can, designed for the Military SUR-G contract.
- Larger bore than most 5.56 cans, for less back pressure
- Direct thread 1/2x28, can be pinned/welded to make a short barrel above 16"
- Can be disassembled for maintenance, not really needed for full power ammo.
- Never used/fired/mounted
OSS Helix Magnum ..... $550
- .338 bore
- Excellent can for AR10's.
- No back pressure/flow through design.
- Can be disassembled for maintenance, not really needed for full power ammo.
- Includes 5/8x24 FlashHider mount (no shims need)
- The suppressor only has about 100 rounds of 30-06 and 200 rounds of 308 through it.
Griffin Armament Recce 5 Mod4 ..... $400
- 5.56 bore
- Tough as nails stainless steel suppressor for 5.56 AR's
- Includes 1/2x28 muzzle brake mount (inside suppressor) & shims. Also the Griffin "Gucci Range Bag" & manual.
- The suppressor only has about 400 rounds of m855 through it.
*** NOTE: LRH won't let you edit a post after 2 weeks..... when any of these sell after 2 weeks from the Original Posting Date, I will repost a new one to reflect those updates. ***
Last edited:
