willtim
Well-Known Member
I have a Winchester Model 70 338 WM. It's stainless, CRF, and Boss. It has a Jewell trigger added by the previous owner. I hated the plastic stock so I bought an HS Precision with an aluminum bedding block. The trigger would not fit so I used a Dremel to remove some aluminum. It seems to fit now but here's my problem. When I lightly tighten the mounting screws ( there are three) the bolt and trigger cycle and fire with no issues. However when I torque them to 65 lbs the bolt won't hold the firing pin. I can loosen the rear screw and the firing pin will engage and the trigger works. Obviously I'm no gunsmith. Help? Thanks.
