SOLD/EXPIRED SOLD Tikka M695 7mm Rem Mag barreled action SOLD

[pods8]

Tikka M695 7mm Rem Mag barreled action uses metal magazines which allow a 3.49" COAL (small improvement over the T3/T3x).


Picked this up with some defects for a project but going a different direction now. Action has two marring marks on it (someone tried removing the barrel but slipped a wrench) and the scope srews are stripped out (the reason the person tried taking it appart to piece out). I had a pair of 1" control mounts (one side had a stripped screw hole which I oversized tapped and installed a larger screw) that I used in the meantime to put a scope on it to test fire (shot about 1" at 100 with random ammo). I intended to have the reciever tapped for 8-40 screws but could be used as-is with dovetail based rings. I no longer have the stock. Unknown round count.



So that's the bad, the good is smooth bolt just like you'd expect on a tikka, same crisp trigger, metal mags with a bit longer COAL allowance.



Barreled action + trigger + bottom metal + 3 round mag + the rings = $350. Add $100 if you happen to want the Minox 3-9x40 ZV 3 BDC sitting on it.



If someone wants parts pieced out I will entertain that also. Obviously the action portion will need to ship to an FFL (I'm a private party shipping it).

 

[robert l]

Re: Tikka M695 7mm Rem Mag barreled action

hello can i ask what is the mark on the receiver in the center of the bolt opening? and how old do you think it is? thanks bob. gun)

 

[pods8]

Re: Tikka M695 7mm Rem Mag barreled action

That mark and the matching one on the opposite corner are the marring I was describing where someone slipped a wrench off the action trying to take off the barrel. My intention was to just contour those in with a file and touch up the bluing or have the action cerakoted when I built a rifle with it.

The M595/M695 were the short/long action models prior to the release of the T3 in a single action length. T3 came out 2003 I believe, I can't immediately find the start date of this model.

I have a 280AI built on another M695 which is why I picked this up for another build but plans have changed.

 

[robert l]

Re: Tikka M695 7mm Rem Mag barreled action

how much would you want for every thing but the barrel and scope mounts? gun)

 

[pods8]

Re: Tikka M695 7mm Rem Mag barreled action

Barrel goes with the action (I am not going to try to remove it) and take or leave the rings, those are a freebie as far as I am concerned.

 

[robert l]

Re: Tikka M695 7mm Rem Mag barreled action

i was going on what you said about parting it out. so 350 is your bottom dollar? gun)

 

[pods8]

Re: Tikka M695 7mm Rem Mag barreled action

I meant if someone wanted bottom metal/bolt/etc. to make it worth splitting those up. What is your offer?

 

[omega1]

Re: Tikka M695 7mm Rem Mag barreled action

Where in Colorado are you located? I'm in pueblo

 

[pods8]

Re: Tikka M695 7mm Rem Mag barreled action

Between boulder and Longmont.

 

[pods8]

Re: Tikka M695 7mm Rem Mag barreled action

The price includes shipping by the way.

Looks like photobucket gave everyone the boot. Here are the photos reposted:

 

[pods8]

Re: Tikka M695 7mm Rem Mag barreled action (PAGE 2 for new picture links)

Bump

 

[Tikka595ll]

Re: Tikka M695 7mm Rem Mag barreled action (PAGE 2 for new picture links)

I will take it per our pm's

 

[pods8]

Re: Tikka M695 7mm Rem Mag barreled action (PAGE 2 for new picture links)

Sold pending funds.

 

[Tikka595ll]

Re: Tikka M695 7mm Rem Mag barreled action (PAGE 2 for new picture links)

payment sent