Campo
Member
I am retrofitting my Browning HC LR (discountinued model) and an planning to cut 1 3/8" off the stock to make the LOP right at 12" with a 1/2" recoil pad.
Looking at the cut line (left vertical line) and the pilot holes for the recoil pad (horizontal lines), does anyone see any issues? The bottom pilot hole will be drilled at a slightly steeper angle than the plotted line.
Rear sling stud will be moved forward as well.
Cross post from another section of the site. If I violated some rule, can a moderator please delete the offending post.
Welcome all thoughts!
Looking at the cut line (left vertical line) and the pilot holes for the recoil pad (horizontal lines), does anyone see any issues? The bottom pilot hole will be drilled at a slightly steeper angle than the plotted line.
Rear sling stud will be moved forward as well.
Cross post from another section of the site. If I violated some rule, can a moderator please delete the offending post.
Welcome all thoughts!
