Shooting and Reloading Solutions

[mecanic04]

Howdy folks,

I want to introduce my Etsy shop, https://gssdesignco.etsy.com
After a back injury left me partially disabled and the loss of my career, I have decided to turn my passion for shooting and designing, into a small business. I design and make different shooting accessories and reloading tool solutions. I have more designs in the works and will add them ASAP. Here are a few of what I make.

-Tim

 

[MarkInPA]

Are you making these from a 3D printer? Would you ever entertain printing something from someone else's design?

The reloading tools case on the Etsy site looks interesting. Could you tell me a little more about it? Have you ever considered making a case to hold srew driver bits? I'll have to look around my reloading bench and see if I could come up with ideas that could be handy.

I know I have seen people make aftermarket spent primer catchers that mounted on the reloading press and was head and shoulders above what the manufacturer provided. I'm sure there are some people using the Rock Chucker press that would pay money for a good solution.

 

[Jeffpatton00]

Howdy folks,

I want to introduce my Etsy shop, https://gssdesignco.etsy.com
After a back injury left me partially disabled and the loss of my career, I have decided to turn my passion for shooting and designing, into a small business. I design and make different shooting accessories and reloading tool solutions. I have more designs in the works and will add them ASAP. Here are a few of what I make.

-Tim

Tagging in.

 

[mecanic04]

Are you making these from a 3D printer? Would you ever entertain printing something from someone else's design?

The reloading tools case on the Etsy site looks interesting. Could you tell me a little more about it? Have you ever considered making a case to hold srew driver bits? I'll have to look around my reloading bench and see if I could come up with ideas that could be handy.

I know I have seen people make aftermarket spent primer catchers that mounted on the reloading press and was head and shoulders above what the manufacturer provided. I'm sure there are some people using the Rock Chucker press that would pay money for a good solution.

Hey Mark,
Printing someone else's design is kind of a gray area. If the design is part of the Creative Commons- Attribution, then I can print and sell the design. If it isn't, then I would likely need to get a release from the designer.

The tools case is simply to keep caliber tools together. I used to keep them in separate baggie, but the case lets me better organize the components.

Send me a DM and we can discuss further.

 

[Ol' Red]

Interesting.

 

[Axl]

I placed an order this morning.

Any chance you can make the chamber plugs in 22 LR?

 

[mecanic04]

I placed an order this morning.

Any chance you can make the chamber plugs in 22 LR?

I can do that. The design might have to change, as the dimensions are much smaller. I'll start today and let you know when it's ready.

 

[mecanic04]

I placed an order this morning.

Any chance you can make the chamber plugs in 22 LR?

Is this what you are looking for? If this is, there is 10% off coupon in your shipment, which you should have tomorrow.

 

[Axl]

Is this what you are looking for? If this is, there is 10% off coupon in your shipment, which you should have tomorrow.

Yes that should work. Will they be available in bright colors too?

 

[Brathany]

Can you make a nylon, or whatever common 3D material is, spout extender for a Lyman vibrator tumbler? I need something to shoot it further into the bowl.

 

[mecanic04]

Yes that should work. Will they be available in bright colors too?

I have lots of fun and bright colors, but durability is a factor. For applications that require added durability, I print in ABS, Poly Carbonate (PC) and Nylon (PA). For the chamber plugs, I use ABS or PC. I can print more fun colors using different materials, but the durability won't be as strong. What color are you wanting? Listing from the least to most durable:
pearl white, silver, lime green, dark green w/ glitter, gray/blue, deep blue, royal blue, red, pink, yellow, yellow+pink, silver+magenta, gold+purple, green+blue, teal/yellow/pink gradient;
white, yellow, neon green, ocean blue, matte black, matte black w/ glitter, bronze, red, terracotta, orange;
black w/ glitter, orange, white.
Those in bold are what I print the plugs in.

 

[mecanic04]

Can you make a nylon, or whatever common 3D material is, spout extender for a Lyman vibrator tumbler? I need something to shoot it further into the bowl.

I would love to design a solution, but I don't have that tumbler to get the dimensions from or to test the fit before producing it.