-
If you are being asked to change your password, and unsure how to do it, follow these instructions. Click here
Seekins rings still loose
- Thread starter bankbum
- Start date
Help Support Long Range Hunting Forum
D
Deleted member 103481
Guest
Hah!
good ol gun shop at it again
good ol gun shop at it again
Took everything to the "knowledgeable" shop. I guess 20moa rails are only compatible with 20moa rings.
Mine are "30moa" rings. According to the 30 stamped on the rings next to the screw holes for the cap.
Some people's kids
Isn't that 30 for 30 mm scope tube not 30 MOA? Didn't thinks Seekins had MOA rings.
The 30 stamped on the rings is to denote scope tube diameter. 30mm tube
order up a new Seekins 20 moa rail & mount them Seekins 30's on it.
order up a new Seekins 20 moa rail & mount them Seekins 30's on it.
Last edited by a moderator:
Yes its for tube diameter lol
- Joined
- Jan 26, 2015
- Messages
- 1,817
YIKES!!!! Take HuntnPack's advice. Don't think you'll be disappointed.Took everything to the "knowledgeable" shop. I guess 20moa rails are only compatible with 20moa rings.
Mine are "30moa" rings. According to the 30 stamped on the rings next to the screw holes for the cap.
Some people's kids
cohunt
Well-Known Member
I guess Im at a loss for words-- why would you pack up your rifle, rings, rail, spend $ and time to drive to the nearest gunsmith to have him spew some wonderfully incorrect information to you when you can just pick up the phone and make a phone call or 2 to see if there is a known problem or solution from the manufactures?
well at least you found out what "gunsmith" to never go back to again.
well at least you found out what "gunsmith" to never go back to again.
I already called. Leaving a message to seekins and CA gives me no answers to my problem
cohunt
Well-Known Member
ok, glad you have at least made the call--hope its gets figured out for you
Yea ive been to a few different gun shops aswell. Coincidently enough nobody has rings or bases in stock.
Cabelas does. All cheap stuff. But they wouldn't let me open a package to check if my rings or bases were out of spec.
I did however just track down weaver rings and they tightened down on the base. The guy said they were picatinny rings...not weaver style rings. They are just weaver brand
Cabelas does. All cheap stuff. But they wouldn't let me open a package to check if my rings or bases were out of spec.
I did however just track down weaver rings and they tightened down on the base. The guy said they were picatinny rings...not weaver style rings. They are just weaver brand
Jolly Green
New Member
Maybe measure your rail with calipers? I think someone posted the correct dimensions earlier in the thread.
I am going through the same issue. Went to mount a scope on a Tuebor action, with one of their rails.
Vortex rings.
Will not tighten down. Measured the Tuebor rail and compared it to a NF rail on another gun. The Tuebor is .025 narrower.
Vortex rings.
Will not tighten down. Measured the Tuebor rail and compared it to a NF rail on another gun. The Tuebor is .025 narrower.
