Scope rings

[hammer111]

I have a bergara ridgeback 6.5prcwith area 419 base.
I'm leaning towards one piece rings . To keep the scope as straight as possible. Or does it matter? This will be a range gun strictly.
Thanks

 

[ShtrRdy]

If the top of the receiver is straight/flat and the Area 419 rail/base is straight/flat then it's not to important to use one piece rings.

 

[ntsqd]

Straight and flat to what tolerances? Nothing it truly straight and nothing is truly flat, but at some point the deviations are too small to matter to the application.

 

[bultinkle]

That part doesn't matter. Just get a good set from known manufacturers and don't cheap out

 

[hammer111]

That part doesn't matter. Just get a good set from known manufacturers and don't cheap out

Absolutely I'm not cheaping out on anything with this gun

 

[Hugger-4641]

Get some Burris Signature rings and you won't need a 20moa rail later.

 

[Varmint Hunter]

Get some Burris Signature rings and you won't need a 20moa rail later.

And .... the scope will be perfectly straight regardless of the receiver tolerances, the scope tube won't get bent and the rings will not pinch or mar the finish of the tube.

Burris Signature rings have been underrated for too long. I have a few sets on magnum rifles and they hold just as well as high dollar rings.

Just my 2 cents

 

[skipglo]

Absolutely I'm not cheaping out on anything with this gun

Then you might as well jump straight to a Spuhr mount ! ... But sit down first!

 

[Hugger-4641]

And .... the scope will be perfectly straight regardless of the receiver tolerances, the scope tube won't get bent and the rings will not pinch or mar the finish of the tube.

Burris Signature rings have been underrated for too long. I have a few sets on magnum rifles and they hold just as well as high dollar rings.

Just my 2 cents

For some folks, $150 is high dollar rings! Wasn't that long ago I was in that camp too

 

[Varmint Hunter]

For some folks, $150 is high dollar rings! Wasn't that long ago I was in that camp too

$150 for a set of rings is high dollar to me. I'd use them if it was necessary, but it's not.