Mxracer532
Well-Known Member
This is a .010 jam. Anyone have anyone have a bullet stick and pullout at this depth? I tested it a few times and it extracted fine.
-
If you are being asked to change your password, and unsure how to do it, follow these instructions. Click here
savage predator .260 accuracy problem
- Thread starter Mxracer532
- Start date
Help Support Long Range Hunting Forum
westcliffe01
Well-Known Member
It may depend on how tight the throat is. On my 223, 6.5x284 , 308 and 8x57 the bullet seems to hang up in the throat and not on the rifling. I get a shiny ring all the way around the cartridge.
I know that an oversize (on diameter) throat is a killer with boat tail bullets and since all the above are set up for high BC bullets perhaps it is just "tight" in the throat ? All are new and possibly it will loosen up as the round count goes up.
I for sure will extract the bullet from the cartridge with as little as 0.004" jam in any of the above.
I know that an oversize (on diameter) throat is a killer with boat tail bullets and since all the above are set up for high BC bullets perhaps it is just "tight" in the throat ? All are new and possibly it will loosen up as the round count goes up.
I for sure will extract the bullet from the cartridge with as little as 0.004" jam in any of the above.
